We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Schneider Electric IEC magnetic contactor, transparent housing, DIN rail mount, screw clamp terminals

Schneider Electric

Schneider Electric LC2K0910B7 IEC Magnetic Contactor 24V AC 9A 3-pole 690V AC

SKU CH-QQEZ-AGHME

IEC magnetic contactor with 24 V AC coil, 9 A inductive rating, three poles and 690 V AC maximum voltage

  • TypeIndustrial Electrical Controls & Automation
  • ColorTransparent
  • Reversing contactor simplifies motor direction control
  • 24 V AC coil enables low-voltage panel integration
  • 9 A inductive rating handles typical motor loads
  • Screw clamp terminals speed up wiring installation
  • DIN rail and plate mounting fits standard cabinets

Product identity and intended use

The Schneider Electric LC2K0910B7 is a reversing IEC magnetic contactor rated for 9 amperes inductive load at up to 690 volts AC. It suits control panels and motor circuits that require forward and reverse operation with a 24 volt AC coil.

Build quality and daily implications

The unit mounts on DIN rail or a flat plate and uses screw clamp terminals for secure wiring. Its transparent housing allows visual inspection of contacts while the compact 2.28 by 3.54 inch footprint fits dense panel layouts.

Compatibility checks before ordering

Verify that your control circuit supplies 24 volts AC and that the load does not exceed 9 amperes inductive or 20 amperes resistive. Confirm the panel provides DIN rail or plate mounting space and that screw terminals match your wire gauge.

Highlights

  • Reversing contactor simplifies motor direction control
  • 24 V AC coil enables low-voltage panel integration
  • 9 A inductive rating handles typical motor loads
  • Screw clamp terminals speed up wiring installation
  • DIN rail and plate mounting fits standard cabinets

Specifications

BrandSCHNEIDER ELECTRIC
TypeIndustrial Electrical Controls & Automation
ColorTransparent

Questions about this item

What voltage does the 24V AC coil require to operate the contactor?

The coil is rated for 24V AC and actuates the three main poles when energised.

What are the exact dimensions for DIN rail or plate mounting clearance?

Overall height is 2.28 in and overall width is 3.54 in; allow that envelope for DIN rail or plate installation.

Which terminals accept the load cables and what is the tightening method?

Screw clamp terminals accept the conductors; tighten each screw to secure the cable without soldering or crimping.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.