We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Transparent IEC magnetic contactor, DIN-rail mount, screw terminals

Schneider Electric

Schneider Electric LC2D32G7 Magnetic Contactor 32 A 120 V AC 3 Pole

SKU CH-ES2A-ABFJX

A 32 A, 120 V AC reversing IEC contactor with 3 poles, screw-clamp terminals and DIN-rail or plate mounting

  • TypeIndustrial Electrical Controls & Automation
  • ColorTransparent
  • 32 A inductive switching for reliable motor control
  • 50 A resistive rating handles heating loads
  • 120 V AC coil voltage suits standard supplies
  • 35 in height fits compact panels
  • DIN rail and plate mounting simplifies installation

Industrial motor control

The Schneider Electric LC2D32G7 is a three-pole IEC magnetic contactor rated for 32 A inductive and 50 A resistive loads at 120 V AC coil voltage. It suits panel builders and maintenance engineers who need reliable switching for motors, heaters or lighting circuits in commercial and light-industrial panels.

Upgrade from smaller or non-reversing contactors

The unit adds reversing capability and two auxiliary contacts in a 3.35 in by 3.54 in footprint that mounts on DIN rail or plate. The step up is justified when an application demands forward-reverse motor control or status feedback without fitting a second device.

Sustained duty in harsh environments

TeSys Deca construction with screw clamp terminals maintains secure connections under continuous 32 A inductive loading. The 4.600 3-inch harsh-environment rating and hook-and-loop closure indicate durability where vibration, dust or temperature cycles would degrade lesser contactors.

Highlights

  • 32 A inductive switching for reliable motor control
  • 50 A resistive rating handles heating loads
  • 120 V AC coil voltage suits standard supplies
  • 35 in height fits compact panels
  • DIN rail and plate mounting simplifies installation

Specifications

BrandSchneider Electric
ModelLC2D32G7
TypeIndustrial Electrical Controls & Automation
ColorTransparent

Questions about this item

What DIN rail or plate dimensions suit the 3.35 in height and 3.54 in width of this contactor?

The unit measures 3.35 in high by 3.54 in wide and mounts on standard 35 mm DIN rail or directly on a flat plate using the integral mounting feet.

Which screw-clamp terminals accept the coil and main cables, and what tightening step is often missed?

Both the 120 V AC coil and the three main poles use screw-clamp terminals; the step often missed is tightening each clamp to the rated torque after the wire is fully seated.

When should the two auxiliary contacts rated 1NO/1NC be inspected or replaced?

Inspect the auxiliary contacts during scheduled panel maintenance; replace them if contact resistance rises or if the 32 A inductive / 50 A resistive load cycles show pitting or welding.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.