We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact grey contactor housing with screw terminals and DIN rail clip

Schneider Electric

Schneider Electric LC2D25G7 IEC Magnetic Contactor 120V AC 3P 25A

SKU CH-GSVG-2WDCS

Three-pole IEC magnetic contactor rated 25 A inductive and 40 A resistive at 120 V AC with 1NO/1NC auxiliary contacts, DIN-rail or plate mounting, and screw-clamp terminals

  • TypeIndustrial Electrical Controls & Automation
  • ColorTransparent
  • Rated for 25 A inductive loads
  • Handles 40 A resistive switching
  • 120 V AC coil voltage standard
  • 3-pole contactor for three-phase control
  • DIN-rail or plate mounting options

IEC Magnetic Contactor 25 A

The Schneider Electric LC2D25G7 is a three-pole IEC magnetic contactor rated for 25 A inductive and 40 A resistive loads. It operates on a 120 V AC coil and includes one normally open and one normally closed auxiliary contact. The unit mounts on DIN rail or plate and uses screw clamp terminals for wiring.

Coil voltage and mounting check

Verify that your control circuit supplies 120 V AC to match the contactor coil rating. Confirm the available panel space accommodates the overall height of 3.35 in and width of 3.54 in. Ensure the mounting surface supports DIN rail or plate installation as specified for this TeSys Deca series unit.

Integration into a control panel

The contactor provides three power poles for switching motor or heating circuits up to the rated currents. Its two auxiliary contacts free up separate relay slots for status feedback or interlocking logic. Screw clamp terminals accept standard ferrules or solid conductors without special tools. The open design requires an enclosure supplied by the installer to meet local safety standards.

Highlights

  • Rated for 25 A inductive loads
  • Handles 40 A resistive switching
  • 120 V AC coil voltage standard
  • 3-pole contactor for three-phase control
  • DIN-rail or plate mounting options

Specifications

BrandSCHNEIDER ELECTRIC
TypeIndustrial Electrical Controls & Automation
ColorTransparent

Questions about this item

Does the Schneider Electric LC2D25G7 contactor include mounting hardware or auxiliary contact blocks in the box?

The contactor is supplied as a single unit with integrated 1NO/1NC auxiliary contacts and screw clamp terminals. Mounting hardware for DIN rail or plate installation is sold separately.

Should I select this 25 A inductive / 40 A resistive model or a higher-rated TeSys Deca contactor for my motor circuit?

Choose this LC2D25G7 when the motor full-load current is 25 A or less at 120 V AC. For larger motors exceeding 25 A inductive, select a higher-rated TeSys Deca model.

What does the 25 A inductive rating mean when the contactor is installed in a 120 V AC control panel?

It indicates the maximum continuous inductive load the three main poles can switch at 120 V AC without overheating, assuming proper DIN rail or plate mounting and screw clamp termination.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.