We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Schneider Electric magnetic contactor, transparent housing, DIN rail mount, screw terminals

Schneider Electric

Schneider Electric LC2D12G7V Magnetic Contactor 120V AC 3P 12A 25A

SKU CH-21E3-GF7RP

An IEC magnetic contactor rated 12 A inductive and 25 A resistive at 120 V AC with three poles, 1 NO/NC auxiliary contacts, screw-clamp terminals and DIN-rail or plate mounting

  • TypeIndustrial Electrical Controls & Automation
  • ColorTransparent
  • Reliable motor switching with 12 A inductive and 25 A resistive ratings
  • Space-saving DIN-rail design fits panels only 3.03 in high and 3.54 in wide
  • 120 V AC coil voltage matches standard control circuits
  • Three-pole configuration handles three-phase loads in one unit
  • Screw-clamp terminals provide secure wiring without special tools

IEC 3-pole motor starter

The Schneider Electric LC2D12G7V is a TeSys Deca magnetic contactor rated for 12 A inductive and 25 A resistive loads at 120 V AC. It provides three power poles and a built-in 1NO/1NC auxiliary contact block for control-circuit feedback. The unit mounts on a standard DIN rail or a flat plate using screw-clamp terminals for secure wiring.

Sustained-load behaviour

With a 12 A inductive rating the contactor handles continuous motor starting and stopping without derating, while the 25 A resistive capacity supports heating or lighting circuits under steady-state conditions. The reversing capability allows forward/reverse motor control when paired with a second contactor and mechanical interlock. Silver-alloy contacts resist welding during frequent inrush currents.

Thermal and power profile

The 120 V AC coil draws modest hold-in power, keeping enclosure temperature rise low during extended duty cycles. No integral fan means silent operation, and the open-frame design relies on natural convection around the 3.03 in high by 3.54 in wide body. Screw-clamp terminals minimise voltage drop, reducing wasted energy in the control panel.

Highlights

  • Reliable motor switching with 12 A inductive and 25 A resistive ratings
  • Space-saving DIN-rail design fits panels only 3.03 in high and 3.54 in wide
  • 120 V AC coil voltage matches standard control circuits
  • Three-pole configuration handles three-phase loads in one unit
  • Screw-clamp terminals provide secure wiring without special tools

Specifications

BrandSCHNEIDER ELECTRIC
TypeIndustrial Electrical Controls & Automation
ColorTransparent

Questions about this item

Does the 120 V AC coil produce noticeable hum or heat when energised continuously?

The coil is rated for 120 V AC operation and the contactor carries up to 12 A inductive or 25 A resistive load; normal magnetic hum is present and the unit is designed for continuous duty without overheating.

What mounting hardware and control wiring are needed to install this contactor?

It mounts on a standard DIN rail or flat plate using screw-clamp terminals for both power and auxiliary circuits; you supply the rail or plate, wire, and a 120 V AC control source.

Will the 3-pole, 12 A inductive rating work with an older motor starter that uses a similar IEC frame?

The TeSys Deca frame measures 3.03 in high by 3.54 in wide with 3 power poles and 1NO/1NC auxiliaries, so it fits existing DIN-rail layouts and matches legacy IEC wiring patterns.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.