We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small transparent rectangular contactor with visible terminals

Schneider Electric

Schneider Electric LC1K0910F7 Miniature Magnetic Contactor 1NO 110V AC 3P

SKU CH-SDR0-6CWQX

A miniature IEC magnetic contactor with one normally open auxiliary contact, 110 V AC coil, three power poles rated 9 A inductive and 20 A resistive.

  • TypeIndustrial Electrical Controls & Automation
  • ColorTransparent
  • Controls 9 A inductive loads at 110 V AC
  • Handles 20 A resistive current without overheating
  • Drives 3 hp motors at 240 V three-phase
  • Powers 5 hp motors at 480 V three-phase
  • Compact 1.73 in square footprint saves panel space

Compact IEC Contactor for Light Industrial Switching

The Schneider Electric LC1K0910F7 is a miniature three-pole magnetic contactor designed for controlling small motors and resistive loads in panel-mounted applications. It carries a 9 A inductive and 20 A resistive rating with a 110 V AC coil, making it suitable for automation panels where space is limited. The unit fits the TeSys K series footprint and provides a single normally-open auxiliary contact for status feedback.

Replaces Larger Contactors in Tight Panels

This model upgrades from bulkier IEC contactors when panel depth and width are constrained, because its 1.73 in square profile leaves room for dense wiring. The jump is worth it when the load stays within 3 hp at 240 V AC or 5 hp at 480 V AC three-phase and reversing capability is not required. It is not for applications needing built-in reversing or higher horsepower ratings.

Stable Operation Under Continuous Duty

Under sustained load the contactor maintains consistent pull-in and drop-out performance thanks to its IEC-rated magnetic system and transparent housing that allows visual inspection of contact wear. The 9 A inductive rating covers typical small-motor starting currents without overheating during extended run cycles. It is not for environments demanding sealed enclosures or frequent high-inrush switching beyond the published ratings.

Highlights

  • Controls 9 A inductive loads at 110 V AC
  • Handles 20 A resistive current without overheating
  • Drives 3 hp motors at 240 V three-phase
  • Powers 5 hp motors at 480 V three-phase
  • Compact 1.73 in square footprint saves panel space

Specifications

BrandSCHNEIDER ELECTRIC
TypeIndustrial Electrical Controls & Automation
ColorTransparent

Questions about this item

What are the overall height and width of the LC1K0910F7 contactor?

The contactor measures 1.73 in overall height and 1.73 in overall width.

How is the 110V AC coil connected on the LC1K0910F7, and what step is often missed?

Connect the coil to the A1 and A2 terminals; the step often missed is verifying the supply is 110V AC before energising.

What maintenance does the 1NO auxiliary contact on the LC1K0910F7 require over time?

Inspect the auxiliary contact for wear or pitting periodically and replace the contactor if the contact becomes unreliable.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.