We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Transparent miniature magnetic contactor with screw clamp terminals, DIN-rail mountable

Schneider Electric

Schneider Electric LC1K0910B7 IEC Miniature Magnetic Contactor 24V AC 3-pole 1NO

SKU CH-DG7W-SKJT2

A 3-pole miniature magnetic contactor with a 24 V AC coil, 9 A AC-3 rating and one normally open auxiliary contact for DIN-rail mounting

  • TypeIndustrial Electrical Controls & Automation
  • ColorTransparent
  • 24 V AC coil for low-voltage control panels
  • 3-pole main contacts switch up to 690 V AC
  • 9 A AC-3 rating at 440 V for motor loads
  • 1 NO auxiliary contact provides instant status feedback
  • Screw clamp terminals suit DIN-rail panel mounting

Compact 3-pole contactor for 24 V AC panels

Schneider Electric's LC1K0910B7 is a non-reversing IEC miniature magnetic contactor with a 24 V AC coil and three normally open main contacts. It mounts on a DIN rail and uses screw clamp terminals for wiring in control panels. The TeSys K device carries a 1 NO instantaneous auxiliary contact for signalling or interlocking duties.

Suited for basic motor-starter and lighting circuits

Installers building direct-on-line starters up to 9 A at 440 V or resistive loads up to 20 A at 690 V will find the ratings match common industrial control tasks. The single auxiliary contact covers simple status feedback but cannot support complex interlocking schemes that require multiple changeover contacts or a normally closed auxiliary.

Coil voltage fixes the control supply

The 24 V AC 50/60 Hz coil determines the control-circuit transformer or power supply you must provide. A different coil voltage would require a different contactor variant, so verify the panel's control voltage before ordering.

Highlights

  • 24 V AC coil for low-voltage control panels
  • 3-pole main contacts switch up to 690 V AC
  • 9 A AC-3 rating at 440 V for motor loads
  • 1 NO auxiliary contact provides instant status feedback
  • Screw clamp terminals suit DIN-rail panel mounting

Specifications

BrandSCHNEIDER ELECTRIC
TypeIndustrial Electrical Controls & Automation
ColorTransparent

Questions about this item

How much current can the 9 A AC-3 rating actually switch in a 440 V motor circuit?

The contactor is rated to switch up to 9 A at 440 V AC under AC-3 motor duty, so a 440 V motor drawing 9 A or less falls within that rating.

What does the 24 V AC 50/60 Hz coil require from the control supply?

The coil operates on 24 V AC at either 50 Hz or 60 Hz, so the control circuit must provide that voltage and frequency range.

Will this unit clip onto a standard DIN rail inside my panel?

Yes, it is designed for DIN-rail mounting in control-panel installations.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.