We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Transparent miniature contactor, DIN-rail mount, screw terminals, 1.77 by 2.28 in

Schneider Electric

Schneider Electric LC1K0610F7 IEC Miniature Magnetic Contactor 1NO 110V AC 3 pole

SKU CH-2T7G-5RQ68

Miniature IEC magnetic contactor with 1NO auxiliary contact, 110V AC coil, three poles, 6A inductive and 15A resistive ratings, screw-clamp terminals, DIN-rail or plate mounting.

  • TypeIndustrial Electrical Controls & Automation
  • ColorTransparent
  • IEC contactor fits standard DIN rail mounting
  • 110 V AC coil voltage for control circuits
  • Three power poles handle three-phase loads
  • 6 A inductive full-load current rating
  • Compact 2.28 in height saves panel space

Schneider Electric LC1K0610F7 Miniature Contactor

The Schneider Electric LC1K0610F7 is a miniature IEC magnetic contactor designed for industrial control panels and automation systems. It suits electricians and panel builders who need a compact switching device for motor starters or lighting circuits.

DIN rail or plate mounting with screw clamp

The contactor mounts on a standard DIN rail or directly onto a plate, allowing flexible layout inside enclosures. Screw clamp terminals provide secure wiring for power and control cables. The transparent housing lets technicians visually confirm contact status during commissioning or maintenance.

110 V AC coil with 6 A inductive and 15

The 110 V AC coil voltage determines compatibility with your control circuit supply. The contactor handles up to 6 A inductive and 15 A resistive full load current across three poles, defining the maximum load it can switch reliably.

Highlights

  • IEC contactor fits standard DIN rail mounting
  • 110 V AC coil voltage for control circuits
  • Three power poles handle three-phase loads
  • 6 A inductive full-load current rating
  • Compact 2.28 in height saves panel space

Specifications

BrandSCHNEIDER ELECTRIC
TypeIndustrial Electrical Controls & Automation
ColorTransparent

Questions about this item

What does the 110V AC coil voltage mean for control-circuit compatibility?

The contactor operates on a 110V AC control signal, so the pilot device or PLC output must supply that exact voltage to energise the coil reliably.

What space does the 1.77 in width and 2.28 in height require inside the enclosure?

The unit measures 1.77 in wide by 2.28 in high, so allow at least that clearance plus wiring room when planning the panel layout.

How do the screw-clamp terminals connect, and what torque step is often missed?

Strip the conductor, insert it into the screw-clamp terminal, and tighten the screw to the manufacturer’s specified torque — skipping the torque check can leave a loose connection.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.