We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact transparent contactor with screw terminals and DIN rail mounting

Schneider Electric

Schneider Electric LC1K0610B7 Miniature Magnetic Contactor 24V AC 3-pole 6A 1NO

SKU CH-M8VK-RD51V

A 3-pole IEC miniature magnetic contactor with 24V AC coil, 6A inductive rating, 1NO auxiliary contact and DIN-rail mounting

  • TypeIndustrial Electrical Controls & Automation
  • ColorTransparent
  • Miniature IEC contactor fits tight panels at 1.77 in wide
  • 24 V AC coil simplifies low-voltage control circuits
  • 6 A inductive rating handles small motor loads reliably
  • 1 NO auxiliary contact provides direct status feedback
  • DIN-rail or plate mounting enables quick cabinet installation

IEC Miniature Magnetic Contactor

The Schneider Electric LC1K0610B7 is a three-pole IEC contactor with a 24 V AC coil and a single normally-open auxiliary contact. It handles up to 6 A inductive and 15 A resistive loads on DIN-rail or plate mounting.

Thermals noise and power draw

The coil operates at 24 V AC with no enclosure rating, so heat dissipation depends on the cabinet ventilation provided by the installer. Screw-clamp terminals ensure a secure connection that minimises resistive losses during normal operation.

6 A inductive rating decides fit

This contactor suits circuits where the inductive full-load current does not exceed 6 A at the stated coil voltage. Applications requiring higher inductive current, a reversing function or an enclosed body will need a different model.

Highlights

  • Miniature IEC contactor fits tight panels at 1.77 in wide
  • 24 V AC coil simplifies low-voltage control circuits
  • 6 A inductive rating handles small motor loads reliably
  • 1 NO auxiliary contact provides direct status feedback
  • DIN-rail or plate mounting enables quick cabinet installation

Specifications

BrandSCHNEIDER ELECTRIC
TypeIndustrial Electrical Controls & Automation
ColorTransparent

Questions about this item

How do I mount the contactor and which wiring step is most often missed?

Clip the unit onto a DIN rail or screw it to a plate, then tighten the three screw-clamp terminals to the specified torque — skipping the torque check is the common error

What part will need replacement after extended operation?

The main contacts are rated for 6 A inductive and 15 A resistive loads; they wear over time and the whole contactor must be replaced when contact resistance rises

What limit appears first during continuous running?

The 6 A inductive current rating at 24 V AC coil voltage is the limiting factor under sustained use

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.