We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Transparent rectangular industrial contactor with terminal screws and coil markings

Schneider Electric

Schneider Electric LC1D65AB7 IEC Magnetic Contactor 24V AC 3P 1NO/1NC

SKU CH-N99H-63VBG

A three-pole IEC magnetic contactor rated at 65 A with a 24 V AC coil and 1NO/1NC auxiliary contacts for motor and resistive load control

  • TypeIndustrial Electrical Controls & Automation
  • ColorTransparent
  • Reliable motor control with 24 V AC coil voltage
  • High switching frequency up to 3600 cycles per hour at 60 °C
  • Safe auxiliary contacts mechanically linked per IEC 60947 standards
  • Damp-heat resistant construction qualified to IACS E10 and IEC 60947-1 Annex Q category D
  • Low 1.5 mOhm impedance for efficient power transmission

IEC Magnetic Contactor 24V AC 3P

This Schneider Electric contactor is a three-pole, non-reversing device rated for 24V AC coil voltage. It suits motor control and resistive load circuits requiring an auxiliary configuration of 1NO/1NC. The unit accepts screw clamp terminals for secure wiring. It is built for industrial electrical control panels.

Suited for 3600 cycles per hour at 60°C

Installers needing a contactor rated for 3600 operations hourly in ambient temperatures up to 60°C will find this model matches the spec. Buyers who require a different coil voltage, pole count or auxiliary contact arrangement should look elsewhere. The damp heat rating follows IACS E10 and IEC 60947-1 Annex Q category D.

65 A rating with 1.5 mOhm impedance

The contactor carries a 65 A rating and presents an average impedance of 1.5 mOhm to minimise power loss. An associated fuse rating conforms to IEC 60947 standards for overcurrent protection. Mechanically linked auxiliary contacts meet IEC mechanical linkage requirements. Compatibility code LC1D indicates potential fit with devices in the same series.

Highlights

  • Reliable motor control with 24 V AC coil voltage
  • High switching frequency up to 3600 cycles per hour at 60 °C
  • Safe auxiliary contacts mechanically linked per IEC 60947 standards
  • Damp-heat resistant construction qualified to IACS E10 and IEC 60947-1 Annex Q category D
  • Low 1.5 mOhm impedance for efficient power transmission

Specifications

BrandSCHNEIDER ELECTRIC
TypeIndustrial Electrical Controls & Automation
ColorTransparent

Questions about this item

How often should the auxiliary contacts on this LC1D contactor be inspected or replaced under heavy cycling?

The contactor is rated for 3600 cycles per hour at up to 60 °C, so auxiliary contact wear will depend on actual duty cycle and load type; plan inspections based on your measured switching frequency.

What thermal limit is reached first when the coil runs continuously at 24 V AC?

The coil is rated for continuous operation at 60 °C (140 °F) ambient; sustained use beyond that temperature is the primary thermal constraint.

How much heat does the contactor add to an enclosure when it stays energised all day?

With an average impedance of 1.5 mOhm, the power dissipated across the main poles is low; the dominant heat source is the 24 V AC coil, which is designed for continuous duty at 60 °C ambient.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.