We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Schneider Electric transparent IEC magnetic contactor, DIN rail mount, screw clamp terminals

Schneider Electric

Schneider Electric LC1D50AL7 200V AC 3P 50A 80A video accessory

SKU CH-N402-8TZ8S

IEC magnetic contactor rated for 50 A inductive and 80 A resistive loads at 200 V AC with 1NO/1NC auxiliary contacts, DIN-rail or plate mounting, and screw-clamp terminals in a 4.8 in by 2.17 in frame

  • TypeIndustrial Electrical Controls & Automation
  • ColorTransparent
  • Reliable motor switching with 50 A inductive rating
  • Handles resistive loads up to 80 A continuous current
  • Operates on standard 200 V AC coil voltage
  • Space-saving 4.8 in height fits tight panels
  • Secure screw-clamp terminals speed up DIN-rail installation

Industrial Magnetic Contactor for Motor Control

The Schneider Electric LC1D50AL7 is an IEC magnetic contactor designed for switching three-phase inductive loads up to 50 A and resistive loads up to 80 A. It suits panel builders and maintenance engineers who need reliable motor starting or isolation in industrial automation systems.

200 V AC Coil Voltage Determines Compatibility

The contactor operates on a 200 V AC control coil, so it must match the control-circuit voltage of your starter or PLC output module. Verify this voltage before purchase because a mismatch will prevent the contactor from pulling in or cause coil damage.

Compact DIN-Rail Mounting with Screw Clamp Terminals

The unit measures 4.8 in high by 2.17 in wide and mounts on standard DIN rail or a back-plate. Screw clamp terminals accept solid or stranded conductors for secure power and control wiring. With no enclosure rating, install it inside a suitable cabinet to protect against dust and moisture.

Highlights

  • Reliable motor switching with 50 A inductive rating
  • Handles resistive loads up to 80 A continuous current
  • Operates on standard 200 V AC coil voltage
  • Space-saving 4.8 in height fits tight panels
  • Secure screw-clamp terminals speed up DIN-rail installation

Specifications

BrandSCHNEIDER ELECTRIC
TypeIndustrial Electrical Controls & Automation
ColorTransparent

Questions about this item

What does the 50 A inductive rating mean when the contactor is installed in a real panel?

It is the maximum current the three main poles can switch continuously for inductive loads such as motors at 200 V AC.

Which coil voltage standard does the 200 V AC rating follow and what does it limit?

The coil is rated for 200 V AC control supply; it determines the control-circuit voltage required to operate the contactor.

What mounting options does the 4.8 in by 2.17 in body support?

It mounts on a standard DIN rail or can be fixed directly to a mounting plate using the integral mounting feet.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.