We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Schneider Electric 3-pole 24V DC contactor, transparent housing, DIN rail mount

Schneider Electric

Schneider Electric LC1D32BD 3-Pole 24V DC 32A Contactor

SKU CH-YBNY-0YSYP

Three-pole IEC contactor rated 32 A inductive and 50 A resistive with a 24 V DC coil, 1 NO and 1 NC auxiliary contacts, screw-clamp terminals.

  • TypeIndustrial Electrical Controls & Automation
  • ColorTransparent
  • Controls 32 A inductive loads reliably
  • 50 A resistive rating supports heavier circuits
  • 24 V DC coil integrates with low-voltage panels
  • Compact 1.77 × 3.35 in fits tight DIN-rail spaces
  • Screw-clamp terminals speed up wiring installation

Schneider Electric LC1D32BD 24V DC Contactor

This IEC magnetic contactor provides 3-pole switching with a 24V DC coil for industrial control panels. It carries 32 A inductive and 50 A resistive loads using screw clamp terminals. The unit mounts on DIN rail or plate and includes two auxiliary contacts rated 1NO/1NC. It belongs to the TeSys Deca series and ships in new condition.

Suits 24V DC panels needing 32 A inductive switching

Builders whose control circuits run on 24V DC and require three-pole isolation with auxiliary feedback will fit this contactor directly. It is not for systems that need reversing operation, AC coil voltages, or higher inductive current ratings than 32 A.

32 A inductive full-load current decides fit

The 32 A inductive rating at the stated coil voltage is the single figure that determines whether this contactor matches the load. Verify the motor or heater nameplate current against this value before specifying the part.

Highlights

  • Controls 32 A inductive loads reliably
  • 50 A resistive rating supports heavier circuits
  • 24 V DC coil integrates with low-voltage panels
  • Compact 1.77 × 3.35 in fits tight DIN-rail spaces
  • Screw-clamp terminals speed up wiring installation

Specifications

BrandSchneider Electric
ModelLC1D32BD
TypeIndustrial Electrical Controls & Automation
ColorTransparent

Questions about this item

How much inductive load can the 32 A contactor handle continuously?

The contactor is rated for 32 A full-load inductive current and 50 A resistive current per pole.

How much heat does the 24 V DC coil dissipate during all-day operation?

The 24 V DC coil draws low power, keeping temperature rise minimal inside the 3.35 in high housing.

Does the unit include a DIN rail or must I supply one?

Mounting is designed for standard DIN rail or plate; the rail itself is not included.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.