We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Transparent IEC magnetic contactor with screw clamp terminals and DIN rail mounting

Schneider Electric

Schneider Electric LC1D18U7 240V AC 3P 18A video accessory

SKU CH-GYG6-VTJ32

An IEC magnetic contactor with 18 A inductive rating and 240 V AC coil for DIN-rail mounting

  • TypeIndustrial Electrical Controls & Automation
  • ColorTransparent
  • Reliable motor control with 18 A inductive rating
  • 240 V AC coil suits standard industrial supplies
  • Three-pole switching handles three-phase loads
  • Compact 3.03 in height fits tight panels
  • DIN-rail or plate mounting simplifies installation

IEC Magnetic Contactor 18 A

The Schneider Electric LC1D18U7 is a three-pole IEC magnetic contactor rated for 18 A inductive loads at 240 V AC. It suits panel builders and maintenance engineers who need a compact TeSys Deca device for motor-starting or resistive switching duties. Two built-in auxiliary contacts (1 NO / 1 NC) provide status feedback without extra modules.

DIN-rail mounting with screw-clamp terminals

The unit clips onto standard DIN rail or can be plate-mounted, and all power and control connections use screw-clamp terminals that accept solid or stranded conductors. Clear terminal markings reduce wiring errors, but the contactor ships without an enclosure, so installers must provide a suitable cabinet or guard to meet local safety codes.

18 A inductive rating at 240 V AC

The single figure that decides fit is the 18 A full-load inductive current at 240 V AC three-phase, which corresponds to approximately 5 hp motor loads. Select this contactor only when the controlled circuit stays within that current and voltage envelope.

Highlights

  • Reliable motor control with 18 A inductive rating
  • 240 V AC coil suits standard industrial supplies
  • Three-pole switching handles three-phase loads
  • Compact 3.03 in height fits tight panels
  • DIN-rail or plate mounting simplifies installation

Specifications

BrandSCHNEIDER ELECTRIC
TypeIndustrial Electrical Controls & Automation
ColorTransparent

Questions about this item

How can I confirm the contactor is operating correctly once it is wired and powered?

Apply 240 V AC to the coil and listen for the audible click; then measure continuity across the three main poles — they should show a closed circuit when energised and open when de-energised, while the 1NO auxiliary contact closes and the 1NC auxiliary contact opens.

What ships with the LC1D18U7 and what must I source separately?

The contactor body with screw-clamp terminals and DIN-rail mounting plate is included; you will need to supply the 240 V AC control wiring, suitably rated power conductors for the 18 A load, and any overload relay or enclosure you require.

Which coil voltage and current rating should I select for a 240 V AC, 18 A inductive load?

Choose the LC1D18U7 — its coil is rated for 240 V AC and the main contacts are rated 18 A inductive (5 hp at 240 V AC three-phase), matching the stated load exactly.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.