We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Transparent IEC magnetic contactor with screw clamp terminals, 6.22 in tall, .47 in wide

Schneider Electric

Schneider Electric LC1D150T7 480VAC 3P 150A IEC Magnetic Contactor

SKU CH-WAEY-5HJV5

IEC magnetic contactor rated 150 A inductive, 200 A resistive at 480 V AC with 1NO/1NC auxiliary contacts and screw-clamp terminals for DIN-rail mounting

  • TypeIndustrial Electrical Controls & Automation
  • ColorTransparent
  • Handles heavy motor loads with 150 A inductive rating
  • Supports resistive heating up to 200 A continuous current
  • Operates directly on 480 V AC industrial supply
  • Compact 6.22 in height saves panel space
  • Mounts on DIN rail or plate for flexible installation

Schneider Electric LC1D150T7 150A Contactor

This Schneider Electric LC1D150T7 is a 480V AC three-pole IEC magnetic contactor rated for 150 amps inductive and 200 amps resistive loads. It belongs to the TeSys Deca series and mounts on DIN rail or plate using screw clamp terminals. The unit includes two auxiliary contacts in a 1NO/1NC configuration and comes without an enclosure. It is suited for industrial motor control and automation panels.

Suits three-pole 480V AC switching up to 150A

This contactor fits panels that need non-reversing three-pole switching at 480 volts with a 150 amp inductive rating. The screw clamp terminals accept standard cable sizes for this current class. Buyers who need reversing operation, a different coil voltage or an enclosed version should look at other models. The 6.22 inch height and 0.47 inch width must match the available DIN rail space.

480V AC coil voltage decides compatibility

The coil requires a 480 volt AC control supply, so the panel’s control circuit must match this voltage exactly. A mismatched coil voltage will prevent operation or damage the contactor. Verify the control source before purchase. The fixed 480V AC coil is the single specification that determines whether this part fits the application.

Highlights

  • Handles heavy motor loads with 150 A inductive rating
  • Supports resistive heating up to 200 A continuous current
  • Operates directly on 480 V AC industrial supply
  • Compact 6.22 in height saves panel space
  • Mounts on DIN rail or plate for flexible installation

Specifications

BrandSchneider Electric
ModelLC1D150T7
TypeIndustrial Electrical Controls & Automation
ColorTransparent

Questions about this item

What control voltage must my circuit supply to energise the 480 V AC coil?

The contactor requires a 480 V AC control signal to operate the coil.

Can the three 150 A main poles share a DIN rail with legacy 6.22 in high starters?

Yes, the 6.22 in height matches standard DIN-rail spacing for side-by-side mounting.

How do I confirm the 1 NO and 1 NC auxiliary contacts change state when the coil pulls in?

Measure continuity across each auxiliary pair; the NO contact should close and the NC contact should open when 480 V AC is applied.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.