We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Schneider Electric TeSys Deca contactor, transparent housing, DIN rail mount, screw clamp terminals

Schneider Electric

Schneider Electric LC1D12LE7 12A 208V AC 3P Contactor

SKU CH-RH36-Z0EAZ

IEC magnetic contactor rated 12 A inductive and 25 A resistive at 208 V AC with 1NO/1NC auxiliary contacts and screw-clamp terminals for DIN-rail or plate mounting

  • TypeIndustrial Electrical Controls & Automation
  • ColorTransparent
  • Reliable motor switching with 12 A inductive current rating
  • Handles resistive loads up to 25 A for versatile applications
  • Operates on standard 208 V AC control voltage
  • Compact 1.77 in width fits tight panel spaces
  • Secure screw-clamp terminals simplify DIN-rail installation

Schneider Electric 12 A 208 V AC Contactor

This IEC magnetic contactor from Schneider Electric carries a 12 A inductive and 25 A resistive rating at 208 V AC across three poles. It mounts on a DIN rail or plate using screw-clamp terminals and includes one normally open and one normally closed auxiliary contact in a TeSys Deca series housing.

Suits motor starters and lighting circuits.

Electricians wiring direct-on-line motor starters, lighting contactors or heating loads will find the fixed 208 V AC coil and non-reversing operation match standard control panels. Installations that require a reversing contactor, a different coil voltage or a higher inductive current rating should select another device.

12 A inductive full-load current

The 12 A inductive full-load current is the key figure that determines whether this contactor can switch the intended load without overheating. Verify that the connected motor or heater does not exceed this rating before specifying the part.

Highlights

  • Reliable motor switching with 12 A inductive current rating
  • Handles resistive loads up to 25 A for versatile applications
  • Operates on standard 208 V AC control voltage
  • Compact 1.77 in width fits tight panel spaces
  • Secure screw-clamp terminals simplify DIN-rail installation

Specifications

BrandSCHNEIDER ELECTRIC
TypeIndustrial Electrical Controls & Automation
ColorTransparent

Questions about this item

How often will the screw-clamp terminals on this 12 A contactor need re-tightening?

Screw-clamp terminals on the TeSys Deca contactor are designed for maintenance-free operation; periodic visual inspection during scheduled panel checks is sufficient.

What is the first limit reached when the contactor runs continuously at its 12 A inductive rating?

The coil temperature rise at 208 V AC becomes the limiting factor before the 12 A inductive or 25 A resistive current ratings are exceeded.

How much heat does the 208 V AC coil generate during all-day operation?

The 208 V AC coil dissipates a few watts, raising the enclosure temperature only slightly; no forced cooling is required for the 3.03 in high unit.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.