We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Transparent plastic IEC contactor, DIN-rail mount, screw terminals, 3-pole, 1NO/1NC auxiliary contacts

Schneider Electric

Schneider Electric LC1D09U7 IEC Magnetic Contactor 240V AC 3P 9A 20A

SKU CH-BZXJ-GTB2S

An IEC magnetic contactor rated for 9 A inductive and 20 A resistive loads at 240 V AC with three poles and 1 NO/1 NC auxiliary contacts

  • TypeIndustrial Electrical Controls & Automation
  • ColorTransparent
  • 9 A inductive current for motor switching
  • 20 A resistive rating for heating loads
  • 240 V AC coil matches standard mains supply
  • Screw-clamp terminals give secure wiring
  • DIN-rail or plate mounting fits panels

IEC Magnetic Contactor for Motor Control

The Schneider Electric LC1D09U7 is a three-pole IEC magnetic contactor designed for switching inductive loads up to 9 A and resistive loads up to 20 A. It operates on a 240 V AC coil and includes one normally open and one normally closed auxiliary contact. The unit mounts on DIN rail or plate and uses screw clamp terminals for secure wiring.

9 A Inductive and 20 A Resistive Ratings

This contactor comfortably handles motor starting and other inductive duties at 9 A full-load current. For purely resistive heating or lighting circuits it supports up to 20 A. The non-reversing design limits use to single-direction motor control, and the open construction offers no NEMA enclosure protection against dust or moisture.

Replaces Older IEC Contactors in TeSys Deca Range

The TeSys Deca series updates earlier IEC contactor frames with the same 3.03 in height and 1.77 in width footprint. The jump is worth it when a panel requires the current TeSys accessory ecosystem or when screw clamp terminals are preferred over legacy spring or ring-tongue connections.

Highlights

  • 9 A inductive current for motor switching
  • 20 A resistive rating for heating loads
  • 240 V AC coil matches standard mains supply
  • Screw-clamp terminals give secure wiring
  • DIN-rail or plate mounting fits panels

Specifications

BrandSCHNEIDER ELECTRIC
TypeIndustrial Electrical Controls & Automation
ColorTransparent

Questions about this item

Will this 240V AC coil contactor fit on the same DIN rail as my existing TeSys Deca units?

Yes, it uses standard DIN rail mounting compatible with the TeSys Deca series.

How can I verify the contactor is operating correctly after installation?

Apply 240V AC to the coil and confirm the main poles switch the 9A inductive or 20A resistive load; the 1NO/1NC auxiliary contacts will change state for remote indication.

What accessories are included with the LC1D09U7 contactor?

The contactor body with screw clamp terminals for power and control wiring is supplied; DIN rail clips are integral to the housing.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.