We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Dark grey industrial motor starter with push buttons, screw terminals, IP20 rating

Schneider Electric

Schneider Electric GV2ME04 Manual Motor Starter 3P 0.63A IP20

SKU CH-2TT8-1B8T7

Protects three-phase motors up to 0.63 A with thermal overload and push-button control in an IP20 housing

  • TypeIndustrial Electrical Controls & Automation
  • Colordark grey
  • Manual protection up to 0.63 A with thermal overload
  • Three-pole switching handles 690 V AC circuits
  • Adjustable overload range from 0.4 A to 0.63 A
  • Screw clamp terminals give secure wiring
  • IP20 enclosure suits indoor panel mounting

Industrial Motor Starter

The Schneider Electric GV2ME04 is a three-phase manual motor starter rated for 0.63 A. It provides thermal overload protection with an adjustable setting range from 0.4 A to 0.63 A. The unit uses screw clamp terminals for secure wiring and carries an IP20 rating. It operates on 50/60 Hz supplies up to 690 V AC.

Installers needing basic overload protection

This starter suits panels where a compact IEC-style device with push-button operation is required. It is not for applications needing a built-in enclosure, magnetic trip units or higher current ratings. Buyers who need integrated short-circuit protection or remote control should look at alternative devices.

Rated for small motors

The 0.63 A maximum setting covers small motor loads within the defined range. Thermal protection trips reliably between the minimum 0.4 A and maximum 0.63 A settings. It runs out of headroom for motors drawing more than 0.63 A or for systems requiring a higher voltage than 690 V AC.

Highlights

  • Manual protection up to 0.63 A with thermal overload
  • Three-pole switching handles 690 V AC circuits
  • Adjustable overload range from 0.4 A to 0.63 A
  • Screw clamp terminals give secure wiring
  • IP20 enclosure suits indoor panel mounting

Specifications

BrandSCHNEIDER ELECTRIC
TypeIndustrial Electrical Controls & Automation
Colordark grey

Questions about this item

What 3-phase voltage supply must I already have for the 690V AC rating?

A three-phase supply up to 690V AC at 50/60 Hz is required for the GV2ME04 to operate within its rated limits.

Will the screw clamp terminals accept the same wire gauges as my older IEC starter?

The screw clamp terminals are designed to standard IEC dimensions, so wiring from an existing IEC starter can be reused without modification.

How do I confirm the thermal overload is set correctly for my 0.63 A motor?

Adjust the dial between the minimum 0.4 A and maximum 0.63 A setting, then verify the motor runs without nuisance tripping under normal load.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.