We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Schneider Electric flush push button 22 mm multi coloured plastic operator

Schneider Electric

Schneider Electric Flush Push Button 22 mm

SKU CH-RM6T-Y6CVP

A 22 mm flush push button with momentary action, plastic construction, IP66 protection and NEMA 13 and 4X ratings for industrial control panels

  • TypeIndustrial Electrical Controls & Automation
  • Size22 mm
  • Momentary flush action gives precise operator control
  • 22 mm mounting diameter fits standard industrial panels
  • IP66 and NEMA 13 4X ratings protect against dust and water jets
  • Complies with IEC 60947 and UL 508 safety standards
  • Plastic head bezel and body resist corrosion in harsh environments

Industrial flush push button, 22 mm

This Schneider Electric operator is a momentary flush push button sized at 22 mm. It is built for industrial electrical control panels and automation systems where a low-profile actuator is required. The plastic head, bezel and body provide a multi-coloured finish suitable for panel identification. It fits standard 22 mm mounting cut-outs in control enclosures.

Sealed to IP66 and NEMA 4X, 13

The button carries an IP66 rating for dust-tight protection and resistance to powerful water jets. NEMA ratings 13 and 4X confirm suitability for indoor and outdoor use with oil, coolant and hose-down exposure. Plastic construction avoids conductive surfaces, supporting Class II insulation per IEC 60536. Certified to UL 508, CSA C22.2 No. 14 and multiple IEC standards for vibration, shock and ingress.

Momentary action with no legend

The operator provides momentary contact only; it does not latch in the pressed position. No legend plate is included or applicable, so marking must be supplied separately if required. Compliance covers Bureau Veritas, DNV, GL, LROS, JIS C8201-1, JIS C8201-5-1, IEC 50102, IEC 60068-2-6, IEC 60068-2-27, IEC 60529, IEC 60947-1, IEC 60947-5-1, IEC 60947-5-4, REACH and RoHS. Buyers needing a maintained or illuminated actuator should select a different operator type.

Highlights

  • Momentary flush action gives precise operator control
  • 22 mm mounting diameter fits standard industrial panels
  • IP66 and NEMA 13 4X ratings protect against dust and water jets
  • Complies with IEC 60947 and UL 508 safety standards
  • Plastic head bezel and body resist corrosion in harsh environments

Specifications

BrandSchneider Electric
TypeIndustrial Electrical Controls & Automation
Size22 mm

Questions about this item

How do I install the 22 mm flush push button and what step is often missed?

Mount the operator in a 22 mm panel cut-out, then secure the locking nut to the specified torque; the step often missed is verifying the IP66 seal seats evenly before final tightening.

What maintenance or replacement will the flush push button need over time?

Inspect the plastic head and bezel for cracking or UV degradation; replace the complete operator if the momentary action feels stiff or the NEMA 13/4X seal shows wear.

What limit appears first during sustained use of the flush push button?

The plastic head and bezel can degrade under continuous mechanical cycling and environmental exposure, reducing the IP66 and NEMA 13/4X sealing effectiveness before the contact mechanism fails.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.