Schneider Electric
Schneider Electric Contact Block 16 mm 1NO/1NC 6A 250V AC
Provides momentary 1NO/1NC switching for 16 mm push buttons at 6 A / 250 V AC
- TypeIndustrial Electrical Controls & Automation
- Size16 mm
- 1NO/1NC contact form enables versatile circuit control
- 6 A at 250 V AC rating supports standard industrial loads
- 16 mm size fits Schneider 16 mm push-button operators
- Meets CSA 22.2 No. 14 and IEC 60947 standards for compliance
- Slip-on Faston terminals allow quick, tool-free wiring
16 mm Contact Block for Schneider Push Buttons
This 16 mm contact block is designed for use with Schneider Electric 16 mm push-button operators. It provides a single normally open and normally closed contact pair for momentary, break-before-make switching in industrial control panels. The unit is rated for 6 A at 250 V AC and carries NEMA B300/R300 designations. It suits panel builders and maintenance engineers assembling or repairing operator stations.
Contact Form and Rating 1NO/1NC 6A 250V AC
The decisive specification is the 1NO/1NC contact form rated at 6 A, 250 V AC with NEMA B300/R300 ratings. This defines the switching capacity and circuit logic the block delivers. Terminal connections accept slip-on, Faston or quick-connect terminals for straightforward wiring. Compliance includes CSA C22.2 No. 14, IEC 60947-1, IEC 60947-5-1, IEC 60947-5-5, JIS C4520, JIS C852 and UL 508. It is not suited for applications requiring higher current ratings or different contact configurations.
Mounting and Compatibility Constraints
The block mounts directly to Schneider 16 mm push-button operators, so it cannot be used with 22 mm or other cut-out sizes. No additional hardware, software or wiring accessories are bundled; the part ships as a single contact block. Installers must supply compatible operators, enclosures and wiring terminals separately. It does not address needs for illuminated operators, selector switches or multi-contact assemblies.
Highlights
- 1NO/1NC contact form enables versatile circuit control
- 6 A at 250 V AC rating supports standard industrial loads
- 16 mm size fits Schneider 16 mm push-button operators
- Meets CSA 22.2 No. 14 and IEC 60947 standards for compliance
- Slip-on Faston terminals allow quick, tool-free wiring
Specifications
| Brand | SCHNEIDER ELECTRIC |
|---|---|
| Type | Industrial Electrical Controls & Automation |
| Size | 16 mm |
Questions about this item
What does the 6A 250V AC rating mean when the block is wired into a control circuit?
It means the contacts can switch up to 6 amps at 250 volts AC in momentary or break-before-make action, within the B300/R300 NEMA designation limits.
Which terminal standard does the slip-on connector follow, and what wire sizes does it accept?
The slip-on faston terminals accept standard quick-connect crimp terminals; the block is certified to CSA C22.2 No. 14, IEC 60947-1, IEC 60947-5-1, IEC 60947-5-5, JIS C4520, JIS C852 and UL 508.
What panel cut-out and mounting hardware are needed for a 16 mm Schneider push-button operator?
The block snaps onto any Schneider 16 mm push-button operator; no separate screws or brackets are required for the contact block itself.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
