We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Transparent IEC control relay with screw terminals, DIN rail mount, 1.77 by 3.03 by 3.31 inches

Schneider Electric

Schneider Electric CAD50G7 IEC Control Relay 5NO 120V AC 10A

SKU CH-015C-SNB3R

IEC control relay with five normally-open contacts rated 10 A at 120 V AC, DIN-rail or surface mount

  • TypeIndustrial Electrical Controls & Automation
  • ColorTransparent
  • Five normally open contacts for versatile circuit control
  • 120 V AC coil voltage for standard industrial supply
  • 10 A AC contact rating at up to 600 V for reliable switching
  • DIN rail and surface mounting for flexible installation
  • IP2X finger-safe terminals for operator protection

IEC Control Relay for 120V AC circuits

This Schneider Electric CAD50G7 relay provides five normally open contacts rated at 10 amps for AC loads up to 600 volts. It suits control panels, motor starters and automation circuits that require reliable switching at 50 or 60 hertz.

DIN rail or surface mounting with screw-clamp

The relay clips onto standard DIN rail or can be surface mounted using integral fixing points. Screw-clamp terminals accept solid or stranded wire; ensure each conductor is fully inserted and the screw is tightened to the specified torque to avoid loose connections that cause overheating.

Verify coil voltage and contact rating before

Confirm the control circuit supplies 120 volts AC at 50 or 60 hertz to match the coil rating. Check that the load current and voltage stay within the 10 amp AC and 2 amp DC contact ratings, and that the enclosure provides at least IP2X protection for the installed environment.

Highlights

  • Five normally open contacts for versatile circuit control
  • 120 V AC coil voltage for standard industrial supply
  • 10 A AC contact rating at up to 600 V for reliable switching
  • DIN rail and surface mounting for flexible installation
  • IP2X finger-safe terminals for operator protection

Specifications

BrandSCHNEIDER ELECTRIC
TypeIndustrial Electrical Controls & Automation
ColorTransparent

Questions about this item

How can I confirm the relay is operating correctly after mounting it on a DIN rail?

Verify the coil receives 120 V AC at 50/60 Hz, then check that all five normally-open contacts close and carry up to 10 A at 120/240/480/600 V AC or 2 A at 125/250/600 V DC.

What comes in the box and what must I supply separately?

The relay body with screw-clamp terminals is included; you must provide DIN rail or surface-mount hardware, wiring, and a 120 V AC control supply.

Which contact rating should I select for a 240 V AC load?

Choose the 10 A @ 240 V AC rating listed for the 5NO contacts.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.