We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Transparent IEC control relay with screw terminals, DIN rail mount

Schneider Electric

Schneider Electric CAD32U7 3NO/2NC 240VAC 10A Relay

SKU CH-HV12-JCGX8

An IEC control relay with three normally-open and two normally-closed contacts rated at 10 A, 240 V AC coil and screw-clamp terminals for DIN-rail mounting

  • TypeIndustrial Electrical Controls & Automation
  • ColorTransparent
  • Switches multiple circuits with 3NO/2NC contact form
  • Handles 10 A AC loads at 120/240/480/600 V
  • Operates on 240 V AC coil at 50/60 Hz
  • Mounts on DIN rail or surface with screw-clamp terminals
  • Rated IP2X and up to 140 °F operating temperature

IEC control relay for automation panels

This Schneider Electric CAD32U7 relay provides IEC-style switching with a 3NO/2NC contact arrangement. It suits control-panel builders and maintenance engineers who need reliable AC coil operation in industrial automation circuits.

Check coil voltage and contact ratings before

Verify that your control circuit supplies 240 V AC at 50 or 60 Hz to match the coil. Confirm the load does not exceed 10 A at up to 600 V AC or 2 A at 125, 250 or 600 V DC. Ensure the enclosure can accept a DIN-rail or surface-mount device with an IP2X rating and a maximum ambient temperature of 140 °F.

Fits standard DIN rails and surface mounts

The relay body measures 1.77 in wide, 3.03 in high and 3.31 in deep, allowing it to sit alongside TeSys D series relays on a common rail. Screw-clamp terminals accept standard wiring without special tools. The 8 VA coil consumption keeps panel power budgets low while freeing space for additional control modules.

Highlights

  • Switches multiple circuits with 3NO/2NC contact form
  • Handles 10 A AC loads at 120/240/480/600 V
  • Operates on 240 V AC coil at 50/60 Hz
  • Mounts on DIN rail or surface with screw-clamp terminals
  • Rated IP2X and up to 140 °F operating temperature

Specifications

BrandSCHNEIDER ELECTRIC
TypeIndustrial Electrical Controls & Automation
ColorTransparent

Questions about this item

What comes in the box with the CAD32U7 relay and what must be purchased separately?

The relay itself is supplied; DIN rail clips and screw-clamp terminal ferrules are not included and must be sourced separately.

Which contact configuration should I choose for a 3NO/2NC requirement?

The CAD32U7 provides exactly three normally-open and two normally-closed contacts rated at 10 A AC, matching that requirement.

What does the 10 A rating mean when the relay is installed in a 240 V AC control panel?

At 240 V AC the contacts are rated for 10 A continuous, with an 8 VA coil draw and IP2X finger-safe terminals.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.