We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Schneider Electric CAD32G7 IEC control relay DIN rail mount grey plastic housing

Schneider Electric

Schneider Electric CAD32G7 IEC Control Relay 120VAC 10A 3NO/2NC

SKU CH-2GDN-T6SSD

An IEC control relay with 120 V AC coil, 10 A AC contact rating and three normally-open plus two normally-closed contacts for DIN-rail or surface mounting

  • Type3" Harsh Environment, Hook-and-Loop Closure
  • IEC-compliant relay for standard industrial control
  • 10 A AC rating handles 120–600 V circuits
  • 0 A DC rating supports 125–600 V loads
  • 3 NO and 2 NC contacts in one 12-pin unit
  • DIN-rail or surface mount fits 3.03 in panel height

IEC Control Relay for Industrial Circuits

The Schneider Electric CAD32G7 is a DIN-rail or surface-mounted IEC control relay built for harsh environments. It switches AC loads up to 10 A at 120, 240, 480 and 600 V and DC loads up to 2.00 A at 125, 250 and 600 V. The coil operates on 120 V AC and draws 3.0 VA. Contact arrangement provides three normally-open and two normally-closed SPST poles across twelve pins.

Upgrade from Lower-Rated or Fewer-Pole Relays

This relay replaces units that cannot handle 10 A at 600 V AC or that lack the required mix of normally-open and normally-closed contacts. The jump is worth it when the application demands both higher voltage withstand and five independent poles in a single 2.91 in high, 1.77 in wide, 3.15 in deep body. It also suits panels where the 3.03 in overall height fits existing DIN-rail spacing.

Suits Panels Needing Five-Pole 10 A Switching

The CAD32G7 fits control panels that require three make and two break contacts with 120 V AC coil supply. It is not for circuits needing more than five poles, higher DC current than 2.00 A, or coil voltages other than 120 V AC. Installers who need plug-in socket mounting or a different contact form should look at alternative relay types.

Highlights

  • IEC-compliant relay for standard industrial control
  • 10 A AC rating handles 120–600 V circuits
  • 0 A DC rating supports 125–600 V loads
  • 3 NO and 2 NC contacts in one 12-pin unit
  • DIN-rail or surface mount fits 3.03 in panel height

Specifications

BrandSchneider Electric
ModelCAD32G7
Type3" Harsh Environment, Hook-and-Loop Closure

Questions about this item

What DIN rail or surface space does the 3.03 in overall height and 1.77 in body width require?

The relay measures 3.03 inches overall height, 1.77 inches body width and 3.15 inches body depth, so allow that envelope on a standard DIN rail or flat surface mount.

Which coil terminals take the 120 V AC supply and what torque should be used?

Apply 120 V AC to the designated coil pins; the coil draws 3.0 VA. Tighten each screw terminal to the manufacturer’s specified torque to avoid loose connections.

When should the 10 A AC contacts be checked or replaced?

Inspect the three normally-open and two normally-closed contacts periodically; replace the relay if contact resistance rises or if the 10 A AC rating at 120/240/480/600 V can no longer be met.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.