Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.0091775BTC
In stock
Schneider Electric
Schneider Electric Biometric Switch Momentary PNP 2m Cable
A biometric light switch with momentary PNP operation, 24 V DC supply, 200 mA rating, 22 mm mounting hole and 2 m cable
- TypeLight Switch
- Biometric access controls authorised users only with 200 record storage
- Momentary PNP operation responds in under one second for precise control
- IP65 and NEMA 12 ratings protect against dust and water jets
- Wide 23 °F to 122 °F operating range suits harsh environments
- 2 m three‑wire cable simplifies installation at 24 V DC
Schneider Electric Biometric Switch
The Schneider Electric Biometric Switch is a momentary PNP light switch designed for 24V DC circuits. It authenticates users through biometric verification and stores up to 200 records for access control. The unit fits a standard 22 mm mounting hole and connects via a 2 metre, three-wire cable.
Thermals noise and power draw
Operating temperature spans 23 to 122 degrees Fahrenheit with an IP65 and NEMA 12 rated polyamide housing. The momentary action draws a maximum of 200 mA and responds in under one second. No moving fan or active cooling is present so acoustic output is negligible.
Build integration and clearance
The compact body measures 2.73 inches wide, 2.13 inches high and 1.53 inches deep for tight panel layouts. CSA, RoHS and UL listed certifications simplify compliance in regulated projects. Builders needing latching operation or higher current capacity should specify a different switch type.
Highlights
- Biometric access controls authorised users only with 200 record storage
- Momentary PNP operation responds in under one second for precise control
- IP65 and NEMA 12 ratings protect against dust and water jets
- Wide 23 °F to 122 °F operating range suits harsh environments
- 2 m three‑wire cable simplifies installation at 24 V DC
Specifications
| Brand | Schneider Electric |
|---|---|
| Type | Light Switch |
Questions about this item
How do I mount the 22 mm biometric switch and wire the 2 m three-wire PNP cable?
Drill a 22 mm hole, secure the polyamide housing, then connect the 2 m three-wire cable to a 24 V DC supply observing PNP polarity; the momentary output activates in under one second.
What maintenance does the 200-record biometric switch need over time?
The sealed IP65 front requires only occasional cleaning; the internal memory holds 200 enrolment records with no battery or moving parts to replace.
At what temperature does the 24 V DC biometric switch reach its operating limit first?
Continuous operation is rated from 23 °F to 122 °F; exceeding 122 °F is the first limit encountered under sustained use.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
