We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Schneider Electric

Schneider Electric AP7811B Metered Rack PDU 2U 30A 208V 12 C13 4 C19

SKU CH-THRK-WNJ0H

A metered rack power distribution unit delivering 30 A at 208 V with twelve C13 and four C19 outlets in a 2U form factor

  • Metered monitoring tracks 30 A load in real time
  • 12 C13 plus 4 C19 outlets serve dense rack gear
  • 2U form factor fits standard 19-inch cabinets
  • 208 V input matches common three-phase distribution

Rack PDU for 2U metered power

The Schneider Electric AP7811B is a metered rack power distribution unit that fits in a 2U space and provides twelve C13 outlets plus four C19 outlets. It is built for data-centre racks and network cabinets that need branch-level current monitoring on a 30 A, 208 V feed. IT managers and facility engineers use it to track load balance across critical servers and switches.

Thermals noise and power draw

The unit operates passively with no internal fans, so it adds no audible noise to the rack environment. Its metering electronics draw only a small fraction of the 30 A capacity, leaving virtually the full rating available for connected equipment. Heat output is limited to the minimal losses of the bus bars and monitoring circuitry.

Highlights

  • Metered monitoring tracks 30 A load in real time
  • 12 C13 plus 4 C19 outlets serve dense rack gear
  • 2U form factor fits standard 19-inch cabinets
  • 208 V input matches common three-phase distribution

Specifications

No published specifications for this item yet.

Questions about this item

How do I mount the 2U Schneider Electric AP7811B in a rack and what step is often missed?

Secure the unit with the included brackets using all four screws per side; the step often missed is tightening the rear bracket screws after the front is flush.

Which outlets on the AP7811B will need replacement first under continuous 30 A 208 V load?

The 12 IEC C13 outlets typically wear before the 4 IEC C19 outlets because they handle more frequent plug cycles.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

More in Wired Accessories

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.