Schneider Electric
Schneider Electric 9001SKS11 Selector Switch Head 30mm 2 Position
A 30 mm two-position selector switch head with maintained action, NEMA 12, 13, 3, 3R, 4, 4X and IP66 ratings
- 30 mm mounting fits standard panels
- Two maintained positions for reliable selector control
- NEMA 12, 13, 3, 3R, 4, 4X ratings suit harsh environments
- IP66 sealing protects against dust and water jets
- CE, CSA and UL certifications confirm safety compliance
30 mm Two-Position Selector Head
The Schneider Electric 9001SKS11 is a 30 mm non-illuminated selector switch head designed for two maintained positions. It suits control panels and machine interfaces where a durable, manually operated selector is required. The head mounts on a compatible operator base and provides a black plastic bezel rated for harsh environments.
Compatibility Checks Before Ordering
Verify that your panel cut-out accepts a 30 mm operator and that the chosen contact block matches the Cam E switching sequence. The head is sold without an operator or key, so confirm the base unit and any required legend plate are already specified. NEMA 12, 13, 3, 3R, 4, 4X and IP66 ratings mean the enclosure must provide equivalent sealing.
Environmental Protection and Power
The plastic bezel carries NEMA 12, 13, 3, 3R, 4 and 4X ratings plus IP66 ingress protection, resisting dust, water jets and oil. No illumination or active components are present, so the head adds no heat, noise or electrical load to the circuit. Power draw and thermal output depend entirely on the downstream contact blocks and connected loads.
Highlights
- 30 mm mounting fits standard panels
- Two maintained positions for reliable selector control
- NEMA 12, 13, 3, 3R, 4, 4X ratings suit harsh environments
- IP66 sealing protects against dust and water jets
- CE, CSA and UL certifications confirm safety compliance
Specifications
| Brand | SCHNEIDER ELECTRIC |
|---|
Questions about this item
Does the 9001SKS11 selector switch head include the operator or contact blocks, or must they be purchased separately?
The head is supplied without an operator; the listing states "Operator Not Included Type of Operator" and "Operator Color No Operator", so a compatible 30 mm operator and contact blocks must be sourced separately.
The specs show NEMA 12, 13, 3, 3R, 4, 4X and IP66 — which rating should I use to decide if this head suits my enclosure?
Choose the rating that matches your enclosure specification; NEMA 4X and IP66 both indicate protection against dust and powerful water jets, while NEMA 12 and 13 cover indoor oil and coolant splash.
What does the "Cam E" designation mean for the two maintained positions on this switch head?
Cam E defines the contact sequence for the two maintained positions; it determines which circuits close or open in each position and must match the contact block cam arrangement used in the starter or contactor assembly.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
