We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 30 mm flush push button switch with plastic head and corrosion resistant thermoplastic bezel

Schneider Electric

Schneider Electric 9001SKR1BH6 30 mm 1NC push button switch

SKU CH-BWFR-WZPXX

A 30 mm black plastic push button with momentary action, one normally-closed contact rated at 10 A and 600 V AC, and NEMA 1, 12, 13, 2, 3, 3R, 4, 4X, 6 plus IP66 protection

  • TypeLight Switch
  • Color/FinishBlack
  • Color MappingBlack
  • 30 mm flush operator fits standard panel cut-outs
  • Momentary action returns automatically after each press
  • 1NC contact rated 10 A at 600 V AC
  • NEMA 4X and IP66 enclosure resists dust and water
  • Certified to UL 508, CSA C22.2 No. 14 and IEC 60947 standards

30 mm 1NC Push Button

The Schneider Electric 9001SKR1BH6 is a flush, non-illuminated push button operator with a 30 mm diameter head. It provides a single normally closed contact rated at 10 A and 600 V AC. The momentary action suits control panels requiring a maintained-off state until pressed. A black thermoplastic bezel resists corrosion and meets NEMA 1, 2, 3, 3R, 4, 4X, 6, 12 and 13 ratings.

Industrial control panels only

This operator fits panels cut for a 30 mm mounting hole and wired for a 1NC contact block. Installers needing a normally open contact, an illuminated head or a different mounting diameter cannot use this part. It is not a selector switch, key switch or emergency-stop device, so panels requiring those functions must look elsewhere.

1NC contact form decides fit

The single normally closed contact opens the circuit only while the button is held. If the application requires the circuit to close on press, or needs multiple contact blocks, this operator will not work. Verify the control schematic calls for a 1NC momentary input before specifying this unit.

Highlights

  • 30 mm flush operator fits standard panel cut-outs
  • Momentary action returns automatically after each press
  • 1NC contact rated 10 A at 600 V AC
  • NEMA 4X and IP66 enclosure resists dust and water
  • Certified to UL 508, CSA C22.2 No. 14 and IEC 60947 standards

Specifications

TypeLight Switch
BrandSCHNEIDER ELECTRIC
Color/FinishBlack
Color MappingBlack

Questions about this item

Is the 30 mm flush button the right size for my panel cutout?

Yes, the 30 mm flush operator matches a standard 30 mm mounting hole and the momentary action suits start-stop or jog control.

What does the 10 A, 600 V AC contact rating mean for my circuit?

The 1NC contact block is rated for 10 amps at up to 600 volts AC, matching the A600/Q600 NEMA designation for heavy-duty pilot duty.

How does the IP66 and NEMA 4X rating protect the switch in a wet environment?

IP66 and NEMA 4X mean the operator is dust-tight and withstands powerful water jets and corrosion, so it survives wash-down and outdoor exposure.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.