Schneider Electric
Schneider Electric 9001SK2105 30mm potentiometer 2W 1000Ohms
A 30 mm corrosion-resistant potentiometer rated 2 W and 1000 Ohms with a 0 to 100 percent dial and NEMA 13, 4, 4X enclosure
- Precise control with 0–100 % dial graduations
- Robust 2 W power handling at 1000 Ω
- Corrosion-resistant build suits harsh environments
- NEMA 13, 4, 4X ratings protect against dust and water
- Compact 30 mm mounting fits standard panels
Industrial potentiometer for control panels
The Schneider Electric 9001SK2105 is a 30 mm corrosion-resistant potentiometer rated at 2 W and 1000 Ohms. It provides variable resistance for industrial control circuits and machine interfaces. The component carries NEMA 13, 4 and 4X ratings for dust, water and corrosion protection. It is suited for panel builders and maintenance engineers specifying a new position sensor.
Graduated dial plate simplifies calibration
A 0 to 100 percent dial plate is included with the unit, giving operators a direct visual reference for shaft position. This removes the need for separate scale labels or custom printing during assembly. The fixed graduations reduce set-up time and help prevent wiring errors during commissioning. No additional software or configuration tools are required.
Limited to low-current AC control circuits
The device is rated for a maximum of 500 V AC and 4 mA, restricting it to signal-level applications rather than power switching. It cannot drive loads directly or interface with higher-current circuits without external amplification. The 2 W power rating also limits continuous dissipation in high-resistance settings. Designers needing higher voltage or current handling must select a different component class.
Highlights
- Precise control with 0–100 % dial graduations
- Robust 2 W power handling at 1000 Ω
- Corrosion-resistant build suits harsh environments
- NEMA 13, 4, 4X ratings protect against dust and water
- Compact 30 mm mounting fits standard panels
Specifications
| Brand | SCHNEIDER ELECTRIC |
|---|
Questions about this item
Will the 2 W, 1000 Ohm potentiometer element need replacement after long service?
The resistive element is rated for 2 W continuous dissipation; it does not have a scheduled replacement interval, but mechanical wear on the 30 mm shaft may eventually require a new unit.
What limits sustained operation first — the 500 V AC ceiling or the 4 mA current ceiling?
At 1000 Ohms the 4 mA maximum current is reached at only 4 V, so the current limit governs long before the 500 V AC voltage rating becomes relevant.
How much heat does the 2 W potentiometer generate when run at full rating all day?
At the 2 W rating the component dissipates 2 watts of heat continuously; the NEMA 13, 4, 4X enclosure resists oil and water but does not add active cooling.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
