We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Schneider Electric 30 mm red metal push button with chrome bezel

Schneider Electric

Schneider Electric 9001KR3RH6 30 mm Red Push Button

SKU CH-0GCN-W5YCE

A 30 mm red metal push button with momentary action, 1NC contact rated at 10A and 600V AC, meeting NEMA 1, 12, 13, 2, 3, 3R, 4, 6 and IP66

  • TypeLight Switch
  • Size/Dimensions30mm
  • Color/FinishRed
  • Color MappingRed
  • Momentary action suits control panels
  • 1NC contact rated 10A at 600V AC
  • Metal head with chrome-plated zinc die-cast bezel
  • IP66 plus NEMA 1, 12, 13, 2, 3, 3R, 4, 6 sealing
  • Certified to UL 508, CSA 22.2 No. 14, EN/IEC 60947 series

30 mm Red Push Button for Industrial Panels

The Schneider Electric 9001KR3RH6 is a non-illuminated momentary push button built for 30 mm panel cut-outs. Its red metal operator and chrome-plated zinc die-cast bezel suit control panels, motor starters and safety circuits. Rated for 10 A at 600 V AC with a 1NC contact form, it meets NEMA A600/Q600 designations for heavy-duty industrial use.

Sealed Construction Limits Heat and Noise

The operator carries NEMA 1, 2, 3, 3R, 4, 6, 12 and 13 ratings plus IP66 ingress protection. No moving fan or active cooling is present, so acoustic output is negligible and thermal rise stays within the contact rating during normal switching cycles. The metal head and sealed bezel resist dust, water jets and oil without extra enclosures.

Momentary Action Holds Under Continuous Duty

Designed for sustained industrial operation, the momentary mechanism maintains consistent actuation force over repeated cycles. Compliance with EN/IEC 60947-5-1, UL 508, CSA C22.2 No. 14 and JIS standards confirms endurance for frequent start-stop sequences. The single 1NC contact opens reliably under load without auxiliary logic or illuminated feedback.

Highlights

  • Momentary action suits control panels
  • 1NC contact rated 10A at 600V AC
  • Metal head with chrome-plated zinc die-cast bezel
  • IP66 plus NEMA 1, 12, 13, 2, 3, 3R, 4, 6 sealing
  • Certified to UL 508, CSA 22.2 No. 14, EN/IEC 60947 series

Specifications

TypeLight Switch
BrandSCHNEIDER ELECTRIC
Size/Dimensions30mm
Color/FinishRed
Color MappingRed

Questions about this item

How do I mount the 30 mm push button in a panel, and what step is often missed?

Drill a 30 mm cut-out, insert the operator, and secure the chrome-plated zinc die-cast bezel with the locking nut; the step often missed is tightening the nut to compress the gasket for IP66 sealing.

Which parts will need replacement after extended use?

The momentary-contact mechanism rated 10 A at 600 V AC (A600/Q600) and the red metal button head are the wear items; the sealed operator meets NEMA 1, 2, 3, 3R, 4, 6, 12, 13 so the enclosure itself does not degrade.

What is the first limitation that appears during continuous operation?

The 1NC contact block is rated for 10 A at 600 V AC; sustained loads above that current or voltage will exceed the A600/Q600 designation and cause premature contact wear.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.