Schneider Electric
Schneider Electric 9001KR1RH6 30 mm Red Push Button Switch
A 30 mm metal push button with momentary action, 1NC contact rated 10A at 600V AC, and IP66 sealing
- TypeLight Switch
- Size/Dimensions30mm
- Color/FinishRed
- Color MappingRed
- 30 mm metal operator withstands harsh environments
- Momentary flush button rated 10 A at 600 V AC
- NEMA 1 2 3 3R 4 6 12 13 and IP66 sealed
- Chrome-plated die-cast aluminium bezel resists corrosion
- Certified to CE CSA UL REACH RoHS WEEE standards
Schneider Electric 30 mm Red Push Button
The Schneider Electric 9001KR1RH6 is a flush-mounted, momentary push button with a 30 mm metal operator head and chrome-plated die-cast aluminium bezel. It carries a single normally closed contact rated at 10A at 600V AC under NEMA A600/Q600 designation. The unit meets NEMA 1, 2, 3, 3R, 4, 6, 12, 13 and IP66 ratings for demanding environments.
Suits panels needing a single normally closed
This device fits control panels that require one momentary 1NC contact with a red metal actuator. It does not suit applications needing an illuminated operator, a normally open contact block, or a different colour code. Buyers who want multiple operators or a maintained action should look at something else.
Mounts in a standard 30 mm cut-out
The operator installs in a 30 mm panel opening and uses screw-clamp terminals for secure wiring. Its metal construction and high NEMA and IP ratings free the designer from adding extra sealing components in wet or dusty locations. Compliance with CE, CSA, UL, REACH, RoHS and WEEE simplifies regulatory approval for the finished assembly.
Highlights
- 30 mm metal operator withstands harsh environments
- Momentary flush button rated 10 A at 600 V AC
- NEMA 1 2 3 3R 4 6 12 13 and IP66 sealed
- Chrome-plated die-cast aluminium bezel resists corrosion
- Certified to CE CSA UL REACH RoHS WEEE standards
Specifications
| Type | Light Switch |
|---|---|
| Brand | SCHNEIDER ELECTRIC |
| Size/Dimensions | 30mm |
| Color/Finish | Red |
| Color Mapping | Red |
Questions about this item
What panel cut-out size do I need for this 30 mm push button?
The operator requires a 30 mm mounting hole in the panel for flush installation.
Can I wire this 1NC contact in series with an existing A600-rated control circuit?
Yes, the contact carries the same NEMA A600/Q600 designation and 10 A at 600 V AC rating.
How do I verify the IP66 seal is intact after mounting?
Inspect the chrome-plated die-cast bezel and metal head for damage, then confirm the flush button returns smoothly after each press.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



