We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Schneider Electric 30 mm red flush push button operator with chrome bezel

Schneider Electric

Schneider Electric 9001KR1RH13 30 mm SPDT red push button operator

SKU CH-8BZQ-9AX7C

A 30 mm flush push button with SPDT contacts rated 10 A at 600 V AC, metal head, chrome bezel, IP66 and NEMA 1, 2, 3, 3R, 4, 6, 12, 13 protection

  • Color MappingRed
  • TypeIndustrial Electrical Controls & Automation
  • Momentary action gives precise control in industrial panels
  • SPDT contact rated 10A at 600V AC handles demanding circuits
  • IP66 and NEMA 4, 6, 13 ratings seal out dust and water
  • Chrome-plated die-cast aluminium bezel resists corrosion and impact
  • Certified to UL 508, CSA 22.2 No. 14 and IEC 60947 standards

Industrial Push Button Operator

The Schneider Electric 9001KR1RH13 is a 30 mm flush push button operator designed for industrial control panels and automation systems. Its SPDT contact form and momentary action suit machinery start-stop circuits and safety interlocks. The red metal head and chrome-plated die-cast aluminium bezel provide clear visual identification in demanding environments. It meets NEMA ratings 1, 2, 3, 3R, 4, 6, 12, 13 and IP66 for ingress protection.

Contact Rating and Environmental Sealing

The operator carries a contact rating of 10A at 600V AC with NEMA designations A600 and Q600 for reliable switching performance. Its IP66 rating ensures protection against powerful water jets and dust ingress during normal operation. The metal head construction resists mechanical wear in high-cycle applications. Compliance with UL 508, CSA C22.2 No. 14 and EN/IEC 60947 standards confirms suitability for certified control assemblies.

Single SPDT Contact Configuration

This unit provides a single SPDT contact block, delivering one normally open and one normally closed circuit per actuation. Applications requiring multiple independent circuits or maintained latch action will need additional operators or different contact blocks. The momentary flush button returns automatically when released, limiting use to push-to-run or push-to-stop functions. Verify the control scheme matches this contact arrangement before specifying.

Highlights

  • Momentary action gives precise control in industrial panels
  • SPDT contact rated 10A at 600V AC handles demanding circuits
  • IP66 and NEMA 4, 6, 13 ratings seal out dust and water
  • Chrome-plated die-cast aluminium bezel resists corrosion and impact
  • Certified to UL 508, CSA 22.2 No. 14 and IEC 60947 standards

Specifications

BrandSCHNEIDER ELECTRIC
Color MappingRed
TypeIndustrial Electrical Controls & Automation

Questions about this item

How do I mount this 30 mm push button operator and what is the common wiring mistake?

Cut a 30 mm panel hole, secure the chrome-plated die-cast aluminium bezel with the locking nut, then wire the SPDT contacts; the frequent error is reversing the normally-open and normally-closed terminals.

Which components will need replacement after extended use?

The momentary-action mechanism and SPDT contacts are rated for 10 A at 600 V AC; they typically wear first and require operator replacement when switching becomes unreliable.

What limit appears first during continuous operation?

The 10 A, 600 V AC contact rating combined with the NEMA A600/Q600 designation defines the thermal and electrical ceiling; exceeding either causes contact degradation before the IP66 seal or NEMA 4/6/13 enclosure ratings are challenged.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.