We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Schneider Electric 30 mm black flush push button with chrome bezel

Schneider Electric

Schneider Electric 9001KR1BH5 30 mm Momentary Push Button Operator, 1NO, Black

SKU CH-ZRME-0FZ7E

A 30 mm momentary push button operator with one normally open contact, rated 10 A at 600 V AC, and sealed to IP66 and NEMA 1, 2, 3, 3R, 4, 6, 12, 13 standards

  • Color MappingBlack
  • TypeIndustrial Electrical Controls & Automation
  • Momentary flush action gives precise single-press control
  • 10 A at 600 V AC handles demanding industrial circuits
  • IP66 and NEMA 1, 2, 3, 3R, 4, 6, 12, 13 ratings seal against dust and water
  • Chrome-plated die-cast aluminium bezel resists corrosion and impact
  • Certified to UL 508, CSA C22.2 No. 14 and IEC 60947 standards for safety compliance

30 mm Momentary Push Button

This Schneider Electric 9001KR1BH5 is a flush-mount momentary push button operator with a 30 mm metal head and a single normally open contact. It carries a contact rating of 10A at 600V AC and meets NEMA A600/Q600 designations. The chrome-plated die-cast aluminium bezel provides IP66 protection and NEMA ratings 1, 2, 3, 3R, 4, 6, 12 and 13. It complies with standards including UL 508, CSA C22.2 No. 14 and IEC 60947 series.

Suits panels needing a single black operator

This unit suits control panels that require a momentary black push button with one normally open circuit and high ingress protection. It is not for applications needing a maintained action, multiple contact blocks, an integrated legend plate or an illuminated head. Builders requiring a different colour, a normally closed contact as standard or a larger cut-out should look at other operators.

10A 600V AC contact rating decides fit

The contact rating of 10A at 600V AC is the primary specification that determines whether this operator matches the circuit load. Verify the application voltage and current against this rating before installation. The NEMA A600/Q600 designation and IEC 60947-5-1 compliance support this rating for industrial control circuits.

Highlights

  • Momentary flush action gives precise single-press control
  • 10 A at 600 V AC handles demanding industrial circuits
  • IP66 and NEMA 1, 2, 3, 3R, 4, 6, 12, 13 ratings seal against dust and water
  • Chrome-plated die-cast aluminium bezel resists corrosion and impact
  • Certified to UL 508, CSA C22.2 No. 14 and IEC 60947 standards for safety compliance

Specifications

BrandSCHNEIDER ELECTRIC
Color MappingBlack
TypeIndustrial Electrical Controls & Automation

Questions about this item

What contact rating does the 9001KR1BH5 need from the control circuit it switches?

The operator carries a 10 A rating at 600 V AC with NEMA designations A600 and Q600, so the control circuit must stay within those limits.

Will the chrome-plated die-cast aluminium bezel fit the same 30 mm cut-out as my existing 9001 series units?

Yes, the 30 mm flush metal head mounts in the standard 30 mm panel cut-out used by other 9001 series operators.

How can I confirm the momentary action is working after wiring the 1NO contact?

Press the black flush button; the circuit closes only while the button is held and opens immediately when released.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.