Scandvik
Scandvik 74125 J-spout folding cold water tap boating maintenance
Folding J-spout cold water tap in passivated 304 stainless steel with 1/2" NPS-M connection and 7/8" mounting hole
- ColorTransparent
- Durable passivated 304 stainless steel resists corrosion
- Lightweight cold water tap suits flybridge or aft cockpit
- J-spout folding design saves space when not in use
- Swivel function directs water flow where needed
- 1/2" NPS-M connection fits standard marine plumbing
Marine cold-water tap for flybridge and cockpit use
The Scandvik 74125 is a folding J-spout tap built for boats. Its passivated 304 stainless steel body resists corrosion in salt-air environments. The lightweight design suits flybridge, bar or aft-cockpit installations where a permanent upright fixture would be in the way.
Swivel action and folded profile under daily
The spout swivels to direct flow and folds down when not in use, keeping deck lines clear. Passivated 304 stainless steel maintains its brush finish through repeated salt spray and UV exposure without rusting. The cold-water-only circuit avoids the complexity of mixed-valve maintenance.
7/8-inch mounting hole and 1/2-inch NPS-M connection
Installation requires a single 7/8-inch hole and a 1/2-inch NPS-M supply fitting. Boats without that exact cut-out or thread will need modification before this tap can be fitted.
Highlights
- Durable passivated 304 stainless steel resists corrosion
- Lightweight cold water tap suits flybridge or aft cockpit
- J-spout folding design saves space when not in use
- Swivel function directs water flow where needed
- 1/2" NPS-M connection fits standard marine plumbing
Specifications
| Color | Transparent |
|---|---|
| Brand | SCANDVIK |
Questions about this item
Does the passivated 304 stainless steel tap generate noise or heat when left running all day?
The tap is a simple mechanical valve with no powered components, so it produces no operational noise or heat during continuous use.
What plumbing fitting must already be in place for the 1/2" NPS-M water connection to work?
A matching 1/2" NPS female thread on the supply line is required to connect the tap's male fitting.
Will the 7/8" mounting hole align with the cut-out on my existing flybridge console?
The tap needs a 7/8" diameter hole; if your current console opening matches that size it will fit directly.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Taylor 70204 Acrylic Coated Polyester Gray Hot Shot BoatGuard Boat Cover
- Transparent
BoatBuckle F12071 Kwik-Lok Gunwale Tie-Down Stainless Steel
- Transparent



