We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Satco S28726 6W LED PL lamp GX23 base 3000K

Satco

Satco S28726 6W LED PL 3000K GX23 light kit

SKU CH-SGSF-A13N9

6-watt LED PL lamp kit delivers 600 lumens at 3000K with a GX23 base, 360-degree beam and 50000-hour life

  • 600 lumens brighten rooms with 3000K warm white
  • 6 watt LED uses less energy than fluorescent
  • 50000 hour life reduces replacement frequency
  • 120-277 volt range fits most commercial circuits
  • GX23 2-pin base installs without ballast

What this light kit is and who it suits

The Satco S28726 is a 6-watt LED PL lamp with a GX23 two-pin base that delivers 600 lumens at 3000K. It operates on 120-277 volt circuits without an external ballast. The kit is intended for commercial or residential fixtures that accept a GX23 base and need a direct-wire replacement.

What the ballast-bypass design changes

Type B wiring eliminates the existing ballast, so the lamp connects straight to line voltage. This removes a common failure point and reduces maintenance. The 360-degree beam angle spreads light evenly across the fixture, matching the distribution of the original PL lamp it replaces.

Capacity and headroom for typical use

Rated at 50,000 average hours, the lamp covers long shifts in corridors, offices or retail displays. At 6 watts it suits low-profile luminaires where heat and power draw are constrained. It will not suit fixtures that require a four-pin base or installations that must retain the original ballast.

Highlights

  • 600 lumens brighten rooms with 3000K warm white
  • 6 watt LED uses less energy than fluorescent
  • 50000 hour life reduces replacement frequency
  • 120-277 volt range fits most commercial circuits
  • GX23 2-pin base installs without ballast

Specifications

BrandSATCO

Questions about this item

How often will the 50000-hour LED module need replacement?

The module is rated for 50000 average hours; at typical use it lasts years before requiring replacement.

Does the 600-lumen output drop when the 120-277 V driver runs continuously?

Lumen maintenance follows the 50000-hour rating; sustained operation within the voltage range does not cause early output loss.

How much heat and noise does the 6 W ballast-bypass kit produce all day?

The 6 W Type B design runs cool and silent with no ballast hum, making it suitable for continuous daily use.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.