We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Short black cable with one SATA 15-pin input splitting to two SATA 15-pin outputs and one Molex 4-pin connector

SATAGear

SATAGear 7in SATA Power Splitter Cord 15-pin to Dual 15-pin + Molex 4-Pin

SKU CH-HR8A-ABFGZ

Splits one 15-pin SATA power input into two 15-pin SATA outputs and one Molex 4-pin connector

  • Splits one SATA power connector into three outputs
  • Dual 15-pin SATA connectors power modern drives
  • Single 4-pin Molex connector supports legacy devices
  • 7-inch cable length fits compact chassis builds
  • New condition ensures reliable factory-fresh performance

Power Splitter Cord

The SATAGear 7in SATA Power Splitter Cord converts one 15-pin SATA power input into two 15-pin SATA outputs and one 4-pin Molex output. It is intended for builders who need to connect additional SATA drives or legacy peripherals from a single power supply connector.

Dual SATA and Molex Outputs

The cable adds two extra SATA power connections for modern drives and one Molex 4-pin connection for older devices. This arrangement lets you power mixed storage generations without requiring additional power supply leads or adapters.

Check Connector Clearance

Verify that your power supply provides a standard 15-pin SATA power plug and that the 7-inch cable length reaches the target devices inside your chassis. Ensure the combined power draw of all attached drives stays within the supply's SATA rail limits.

Highlights

  • Splits one SATA power connector into three outputs
  • Dual 15-pin SATA connectors power modern drives
  • Single 4-pin Molex connector supports legacy devices
  • 7-inch cable length fits compact chassis builds
  • New condition ensures reliable factory-fresh performance

Specifications

Model7X15X4A

Questions about this item

Will the 15-pin SATA connectors on this splitter need replacement after extended use?

The 15-pin SATA connectors are rated for standard mating cycles and should not need replacement under normal internal use.

What is the first limit reached when powering two SATA drives and a Molex device from one 15-pin input?

The limit is the current capacity of the single 15-pin SATA power source feeding all three outputs.

Does the 7-inch cable length add noticeable heat or resistance when the splitter runs all day?

The short 7-inch length keeps resistance low, so heat rise is minimal during continuous operation.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.