We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow 31 in SATA III cable, 26AWG, straight to right-angle connector

SATACables

SATACables 26SR787YL 31 in SATA III 26AWG Straight to Right Cable

SKU CH-T9EH-FMAA8

A 31-inch SATA cable with straight-to-right connectors supports 3.0 Gbps transfer rates and shielded 26AWG construction for reduced EMI

  • SATA III revision supports 6 Gbps throughput
  • 26AWG double-shielded construction resists EMI/RFI interference
  • 31 in length simplifies routing in desktop or server chassis
  • Straight-to-right connector eases installation in tight drive bays
  • Narrow cable profile improves internal airflow for multi-drive systems

SATA III 26AWG Cable 31 in

This 31 inch SATA III cable uses 26AWG conductors and straight to right angle connectors. It links Serial ATA hard drives or optical drives to a motherboard or controller. The double shielded design reduces EMI and RFI interference. Builders routing cables in tight spaces will find the narrow profile helpful.

Practical limits of SATA III 6 Gbps

The SATA revision 3.0 interface supports up to 6 Gbps theoretical throughput. Real world speed depends on the drive and controller capabilities. The cable meets Serial ATA 1.0 standards for backward compatibility. It does not increase the performance ceiling of older SATA I or II ports.

Straight to right angle connector orientation

One end features a straight 7 pin female connector while the other end uses a right angle 7 pin female connector. This fixed orientation suits specific motherboard port layouts and drive bay positions. Buyers who need a straight to straight or right to right configuration must choose a different cable.

Highlights

  • SATA III revision supports 6 Gbps throughput
  • 26AWG double-shielded construction resists EMI/RFI interference
  • 31 in length simplifies routing in desktop or server chassis
  • Straight-to-right connector eases installation in tight drive bays
  • Narrow cable profile improves internal airflow for multi-drive systems

Specifications

Model26SR787YL

Questions about this item

Should I pick the 31 in 26AWG straight-to-right cable or a different length?

The 31 in 26AWG straight-to-right model suits mid-tower builds where a right-angle connector clears the drive cage; shorter or longer lengths exist but are separate part numbers.

What does the 3.0 Gbps headline figure deliver once the cable is installed?

The cable supports up to 3.0 Gbps data transfer, matching SATA 1.0 devices and SATA II controllers; actual throughput depends on the drive and controller capabilities.

Which SATA interface standard does the 26SR787YL use and what speed does it cap at?

It meets the Serial ATA 1.0 standard and is rated for 3.0 Gbps, so the practical ceiling is 3.0 Gbps even if the host port supports higher revisions.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.