Saramonic
Saramonic SR-M1 Lavalier Microphone 3.5mm 4.1ft
An omnidirectional electret condenser lavalier microphone with a 3.5 mm connector and 4.1 ft cable, designed for wireless transmitters and recorders with less than 1% THD at 94 dB SPL
- Omnidirectional pickup captures clear audio from every direction
- 5 mm connector fits Saramonic, Sennheiser, Rode, Tascam and Zoom gear
- Less than 1 % THD at 94 dB SPL keeps recordings distortion-free
- 1 ft cable gives freedom of movement on set
- Designed as a direct replacement for Blink 500 and Blink 500 Pro systems
Compact lavalier for wireless systems
The Saramonic SR-M1 is an omnidirectional electret condenser lavalier microphone built for wireless transmitters and portable recorders. It captures consistent sound from all directions with a 3.5 mm connector and a 4.1 ft cable. The microphone serves as a direct replacement for Blink 500 and Blink 500 Pro systems while also pairing with Sennheiser, Rode, Tascam and Zoom devices.
Plug-in audio for mobile rigs
The 3.5 mm jack plugs straight into wireless bodypacks, handheld recorders, DSLR and mirrorless cameras without adapters. Its lightweight clip and 1.25 m lead keep the capsule close to the speaker while the transmitter stays out of sight. No external power is required, so the unit draws bias voltage from the connected device and adds negligible bulk to a run-and-gun kit.
Clear speech capture with low distortion
The capsule delivers less than 1 % THD at 94 dB SPL, keeping dialogue clean even at raised voices. Omnidirectional pickup handles subjects who turn their heads without off-axis colouration. The fixed 4.1 ft cable limits placement distance, so users needing longer runs or balanced XLR connections will need a different microphone.
Highlights
- Omnidirectional pickup captures clear audio from every direction
- 5 mm connector fits Saramonic, Sennheiser, Rode, Tascam and Zoom gear
- Less than 1 % THD at 94 dB SPL keeps recordings distortion-free
- 1 ft cable gives freedom of movement on set
- Designed as a direct replacement for Blink 500 and Blink 500 Pro systems
Specifications
No published specifications for this item yet.
Questions about this item
How much distortion does the electret condenser add at 94 dB SPL?
The microphone specifies less than one percent total harmonic distortion at 94 dB SPL, keeping recordings clean even at typical speech levels.
Does the cable length create any handling noise or power loss during all-day sessions?
The 4.1 foot cable is passive and unbalanced, so it adds no active noise or voltage drop, but keep it away from strong RF sources to avoid interference.
Which transmitter or recorder input do I need to plug this lavalier into?
A 3.5 mm microphone input with plug-in power — compatible with Saramonic Blink 500, Blink 500 Pro, Sennheiser, Rode, Tascam, Zoom and similar wireless transmitters or recorders.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



