Sanyo
Sanyo UST-P1CV1 projector lamp 230W Philips UHP 5000/8000 hrs
A replacement lamp module with a 230 W Philips UHP bulb delivering 5,000 to 8,000 hours of life
- TypeUHP
- Wattage230W
- Lamp Life5,000 (Normal) - 8,000 (Economy) Hrs.
- Ready to install with pre-assembled housing
- 230W Philips UHP bulb for reliable brightness
- 5000 hours normal or 8000 hours economy life
- Manufactured to ISO 9001 quality standards
- Tested for beam performance, ignition and run-time
Sanyo UST-P1CV1 projector lamp
The Sanyo UST-P1CV1 is a new replacement lamp module with a Philips UHP 230W bulb pre-installed in its housing. It is built for owners of compatible Sanyo projectors who need a straightforward, ready-to-fit light source. The assembly arrives fully assembled, removing the need for separate bulb handling during installation.
Suits users wanting an OEM-sourced bulb
This lamp suits buyers who prefer a genuine Philips UHP bulb and a housing matched to the original part number SP-LAMP-084. It is not for buyers who need a bare bulb without the housing, nor for those whose projector requires a different wattage or connector layout. The module covers one specific fitment only.
5000 hours normal, 8000 hours economy
In normal mode the lamp is rated for 5000 hours of operation, while economy mode extends the rating to 8000 hours. The 230W UHP bulb delivers the brightness the projector was designed for throughout that span. Once the rated hours are reached, light output will drop below usable levels and a replacement will be required.
Highlights
- Ready to install with pre-assembled housing
- 230W Philips UHP bulb for reliable brightness
- 5000 hours normal or 8000 hours economy life
- Manufactured to ISO 9001 quality standards
- Tested for beam performance, ignition and run-time
Specifications
| Brand | Sanyo |
|---|---|
| Type | UHP |
| Wattage | 230W |
| Lamp Life | 5,000 (Normal) - 8,000 (Economy) Hrs. |
Questions about this item
Which Sanyo projector models accept the UST-P1CV1 lamp module?
The UST-P1CV1 module fits Sanyo projectors that list part number SP-LAMP-084 as the correct replacement lamp.
Will the 230 W Philips UHP bulb work in a projector that originally shipped with a lower-wattage lamp?
No — the 230 W UHP bulb must match the projector's original wattage specification; using it in a lower-wattage unit can cause overheating or ignition failure.
How can I verify the lamp is running in economy mode after installation?
Check the projector's on-screen lamp timer; it should show an expected life of 8000 hours when economy mode is active, versus 5000 hours in normal mode.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



