We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Sanyo PRM30A projector lamp module with housing

Sanyo

Sanyo PRM30A (POA-LMP141) 230W 4000H projector lamp

SKU CH-8AXP-9MF7C

New Sanyo PRM30A replacement projector lamp module with 230W Ushio NSH bulb and housing, rated for 4000 hours

  • TypeNSH
  • Wattage230W
  • Lamp Life4,000 Hrs.
  • Ready-to-install module with bulb and housing
  • 230W NSH lamp delivers 4000 hours of use
  • Manufactured to ISO 9001 quality standards
  • Compatible with Sanyo POA-LMP141 projectors
  • OEM Ushio bulb ensures reliable ignition and run-time

Sanyo PRM30A projector lamp module

The Sanyo PRM30A module delivers a fully assembled 230W Ushio NSH bulb inside its housing so it fits straight into the projector without extra assembly. It is built to ISO9001 quality checks for beam performance, ignition, voltage, appearance, connections and run-time.

Who this suits and who should look elsewhere

This lamp suits owners of compatible Sanyo projectors needing a direct replacement with 4,000 hours rated life. It is not for users whose projector requires a different wattage, a different housing design, or a lamp code other than PRM30A or POA-LMP141.

Capacity and headroom

The 230W NSH bulb is rated for 4,000 hours of typical use before brightness drops to half. It comfortably handles daily classroom or meeting-room projection cycles. It runs out when the hour counter reaches the rated limit or if the projector operates in high-temperature environments that accelerate ageing.

Highlights

  • Ready-to-install module with bulb and housing
  • 230W NSH lamp delivers 4000 hours of use
  • Manufactured to ISO 9001 quality standards
  • Compatible with Sanyo POA-LMP141 projectors
  • OEM Ushio bulb ensures reliable ignition and run-time

Specifications

BrandSanyo
TypeNSH
Wattage230W
Lamp Life4,000 Hrs.

Questions about this item

Which Sanyo projectors accept the POA-LMP141 lamp module?

The POA-LMP141 module fits the Sanyo projectors that list PRM30A or POA-LMP141 as the replacement lamp. Check your projector's manual or the label inside the lamp door for the exact part number before ordering.

Will the 230 W NSH lamp run in a projector that originally used a lower-wattage module?

No. The projector's ballast and cooling are matched to a specific wattage. Installing a 230 W lamp in a unit designed for a different wattage can cause ignition failure or overheating.

How do I confirm the new lamp is operating correctly after installation?

Reset the lamp timer in the projector menu, then verify the on-screen counter starts at zero and the image reaches full brightness without flickering or colour shift during the first few hours.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.