Sanyo
Sanyo PRM24-LAMP 230W projector lamp
Replacement 230 W lamp module with Osram P-VIP bulb, rated 3,000 hours normal or 4,000 hours economy
- TypeP-VIP
- Wattage230W
- Lamp Life3,000 (Normal) - 4,000 (Economy) Hrs.
- Ready-to-install module with bulb and housing
- 230 W P-VIP lamp delivers bright projection
- 3,000 hours normal mode lamp life
- 4,000 hours economy mode extends usage
- Manufactured to ISO 9001 quality standards
Direct-fit replacement
The Sanyo PRM24-LAMP is a new projector lamp module supplied as a fully assembled bulb and housing. It is designed for owners of compatible Sanyo projectors who need a ready-to-install light source without separate handling of the bare bulb. The module uses a P-VIP type lamp rated at 230W and meets ISO 9001 manufacturing standards.
Restores original brightness
This lamp replaces a dimmed or failed module in the same projector, returning light output to factory levels. The jump is worth it when the existing lamp has reached the end of its rated life or when image quality has degraded noticeably. Two economy settings extend the usable period to 4000 hours, while normal mode delivers 3000 hours.
Rated for 3000 to 4000 hours
In normal operation the lamp provides 3000 hours of illumination, and economy mode stretches that to 4000 hours. The 230W P-VIP bulb handles typical business and education projection workloads within this window. Once the rated hours are exceeded, brightness drops and the risk of failure rises, so a fresh module is required.
Highlights
- Ready-to-install module with bulb and housing
- 230 W P-VIP lamp delivers bright projection
- 3,000 hours normal mode lamp life
- 4,000 hours economy mode extends usage
- Manufactured to ISO 9001 quality standards
Specifications
| Brand | Sanyo |
|---|---|
| Type | P-VIP |
| Wattage | 230W |
| Lamp Life | 3,000 (Normal) - 4,000 (Economy) Hrs. |
Questions about this item
Which Sanyo projectors accept the PRM24-LAMP housing?
The PRM24-LAMP is a complete module with a 230 W P-VIP bulb inside a housing built to Sanyo's mechanical specification, so it drops into the lamp compartment of the projectors that originally shipped with the PRM24-LAMP part number.
What is the correct way to seat the lamp module and reset the hour counter?
Power off the projector, unplug it, let it cool, remove the lamp cover, slide the PRM24-LAMP assembly straight in until the connector clicks, replace the cover, then use the projector menu to reset the lamp timer to zero.
When should I plan to replace the PRM24-LAMP bulb?
The Osram P-VIP 230 W bulb is rated for 3000 hours in normal mode or 4000 hours in economy mode; replace the module when the projector warns of end-of-life or image brightness drops noticeably.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



