We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Sanyo

Sanyo PLC-XU21 POA-LMP21 projector lamp 150W 2000 Hrs

SKU CH-PF2M-G1SQT

A genuine compatible replacement lamp module with a 150W UHP bulb and housing, rated for 2,000 hours of use

  • TypeUHP
  • Wattage150W
  • Lamp Life2,000 Hrs.
  • Genuine replacement lamp fits Sanyo PLC-XU21 projectors directly
  • Ready-to-install module with housing saves setup time
  • 150W UHP bulb delivers consistent brightness output
  • Rated 2000 hours lamp life for extended use
  • Manufactured to ISO 9001 quality standards

Sanyo PLC-XU21 replacement lamp

This 150W UHP lamp module fits the Sanyo PLC-XU21 projector and ships as a complete housing for tool-free installation. It restores original brightness and colour balance when the factory lamp reaches end of life. The unit is supplied new and ready to fit without alignment or additional parts.

2000-hour rated lamp life

The UHP bulb is rated for 2000 hours of typical use before light output drops below usable levels. Actual runtime varies with projector power settings, ambient temperature and duty cycle. Frequent short ignitions reduce total hours more than continuous operation. The lamp contains no user-serviceable components and must be replaced as a module.

150W power envelope

The 150W rating matches the projector's designed thermal and electrical envelope, so no ballast modification is required. It supports standard presentation and video modes at full rated brightness. The lamp is not suitable for projectors that specify a different wattage or lamp code. Buyers needing longer runtime or higher lumen output should select a projector model designed for those parameters.

Highlights

  • Genuine replacement lamp fits Sanyo PLC-XU21 projectors directly
  • Ready-to-install module with housing saves setup time
  • 150W UHP bulb delivers consistent brightness output
  • Rated 2000 hours lamp life for extended use
  • Manufactured to ISO 9001 quality standards

Specifications

BrandSanyo
TypeUHP
Wattage150W
Lamp Life2,000 Hrs.

Questions about this item

Which version of the POA-LMP21 lamp should I choose — OEM direct, Sanyo-branded, OEM compatible or third-party compatible?

All four versions use a 150W UHP bulb rated for 2000 hours and meet ISO9001 quality checks; the OEM direct and Sanyo-branded units come from the original bulb makers, the OEM compatible uses a different OEM supplier, and the third-party compatible is built with genuine OEM parts at a lower cost.

What does the 2000-hour rating mean for daily classroom use?

At typical brightness the 150W UHP lamp is designed to last around 2000 hours before brightness drops to half, so a projector running five hours each school day would need a replacement after roughly two academic years.

Does the lamp housing use a standard connector that fits the PLC-XU21 without adapters?

Yes — the module ships as a fully assembled bulb and housing made to the original PLC-XU21 specification, so it plugs straight into the projector with no extra cables or adapters required.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.