Sanyo
Sanyo PLC-XT21 Projector Lamp POA-LMP105 300W
A 300 W replacement lamp module with a Philips P-VIP bulb and housing, rated for 2,000 to 3,000 hours
- TypeProjector Lamp
- Wattage300W
- Lamp Life2,000 (Normal) - 3,000 (Economy) Hrs.
- Ready-to-install module with genuine Philips 300W P-VIP bulb
- Up to 3,000 hours lamp life in Economy mode
- 2,000 hours rated life in Normal mode
- Manufactured to ISO 9001 quality standards
- OEM replacement for Sanyo POA-LMP105 projector
Ready-to-install module
The Sanyo PLC-XT21 lamp ships as a complete housing with a 300W Philips P-VIP bulb already fitted. Projector owners can swap the old module without handling a bare bulb or aligning separate parts. It suits users who want a direct replacement that restores brightness in minutes.
ISO9001 verified build
Each unit passes checks for beam performance, ignition, voltage, appearance, connections and run-time before leaving the factory. The housing uses the same mounting points as the original POA-LMP105, so it seats securely in the projector chassis. No adapter brackets or cable modifications are required.
Two economy settings
Running the lamp in Normal mode yields 2000 hours of rated life, while Economy mode extends that to 3000 hours. The choice lets a classroom or meeting-room operator balance brightness against replacement frequency. No extra software or firmware is needed to switch between the modes.
Highlights
- Ready-to-install module with genuine Philips 300W P-VIP bulb
- Up to 3,000 hours lamp life in Economy mode
- 2,000 hours rated life in Normal mode
- Manufactured to ISO 9001 quality standards
- OEM replacement for Sanyo POA-LMP105 projector
Specifications
| Brand | Sanyo |
|---|---|
| Type | Projector Lamp |
| Wattage | 300W |
| Lamp Life | 2,000 (Normal) - 3,000 (Economy) Hrs. |
Questions about this item
Does the POA-LMP105 lamp use a proprietary connector or a standard interface?
The module is a direct replacement for the Sanyo PLC-XT21 projector and plugs into the projector's original lamp socket without an adapter.
What are the physical dimensions and mounting points of the housing?
The lamp ships as a complete bulb-and-housing assembly built to match the original POA-LMP105 form factor for tool-less insertion.
How do I install the lamp and reset the hour counter?
Power off and unplug the projector, remove the lamp cover, slide out the old module, insert the new one until it seats firmly, replace the cover, then use the on-screen menu to reset the lamp timer.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



