We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Sanyo PLC-XL51A projector lamp module with housing, new condition

Sanyo

Sanyo PLC-XL51A projector lamp NSHA 275W 2000 hrs

SKU CH-2881-8XWFX

Replacement projector lamp module with a 275 W NSHA bulb rated for 2,000 hours, supplied fully assembled for direct installation

  • TypeNSHA
  • Wattage275W
  • Lamp Life2,000 Hrs.
  • Ready to install with pre-assembled housing
  • 275W NSHA lamp matches original specification
  • 2000-hour rated life for extended use
  • Manufactured to ISO 9001 quality standards
  • Compatible with Sanyo PLC-XL51A projector

Sanyo PLC-XL51A replacement lamp

The Sanyo PLC-XL51A lamp module replaces the original POA-LMP111 unit in compatible Sanyo projectors. It arrives as a fully assembled NSHA 275W bulb inside its housing, so installation requires no extra tools or alignment steps. The unit is new and built to ISO 9001 quality standards.

Upgrade from a dim or expired module

When the existing lamp reaches its 2,000 hour rating or shows noticeable brightness loss, this module restores the projector’s original output. The jump is worth it if the current lamp has failed, flickers, or no longer fills the screen with adequate light for presentations or classroom use.

Sustained output over the rated life

The NSHA 275W bulb maintains stable ignition and voltage regulation throughout extended sessions, avoiding the colour shift and hot-spot drift that can appear with lesser modules. Each lamp is tested for beam performance and run-time consistency, so brightness stays even across the full 2,000 hour service interval.

Highlights

  • Ready to install with pre-assembled housing
  • 275W NSHA lamp matches original specification
  • 2000-hour rated life for extended use
  • Manufactured to ISO 9001 quality standards
  • Compatible with Sanyo PLC-XL51A projector

Specifications

BrandSanyo
TypeNSHA
Wattage275W
Lamp Life2,000 Hrs.

Questions about this item

What housing dimensions does the POA-LMP111 module need to fit the PLC-XL51A projector?

The lamp is a fully assembled bulb and housing built to the original POA-LMP111 form factor, so it slots directly into the Sanyo PLC-XL51A without extra brackets or adapters.

Which steps must be followed to install the NSHA 275W lamp module, and where do installers most often go wrong?

Power off and unplug the projector, let it cool completely, remove the old lamp cover, slide the new module straight in until the connector seats, replace the cover, then reset the lamp timer in the menu; skipping the timer reset is the common error.

When will the NSHA 275W bulb require replacement based on its rated life?

The lamp is rated for 2000 hours of use; after that period brightness drops and ignition becomes unreliable, so plan a replacement once the projector's hour counter approaches that figure.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.