We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Sanyo ET-SLMP132 projector lamp module with 220W UHP bulb in housing

Sanyo

Sanyo ET-SLMP132 Projector Lamp 220W UHP 2000-3000 Hrs

SKU CH-0G2G-D2D9R

A ready-to-install 220 W UHP lamp module rated for 2,000 to 3,000 hours

  • TypeUHP
  • Wattage220W
  • Lamp Life2,000 (Normal) - 3,000 (Economy) Hrs.
  • Ready to install with pre-assembled housing
  • Philips UHP 220W bulb delivers bright projection
  • 2,000 normal hours extends replacement interval
  • 3,000 economy hours lowers running cost
  • Manufactured to ISO9001 quality standards

Sanyo ET-SLMP132 replacement lamp

The Sanyo ET-SLMP132 is a new replacement projector lamp module built for Sanyo projectors that use the POA-LMP132 designation. It arrives as a fully assembled bulb and housing so installation is straightforward. The lamp uses a Philips UHP 220 W bulb and is rated for 2000 hours in normal mode or 3000 hours in economy mode. It suits owners who need a direct OEM-spec replacement without sourcing bare bulbs.

Thermals noise and power

The lamp draws 220 W during operation and relies on the projector’s internal cooling system to manage heat. Acoustic output is determined by the host projector’s fan profile rather than the lamp itself. In normal mode the rated life is 2000 hours while economy mode extends it to 3000 hours. The module contains no active cooling components of its own.

Pre-assembled housing and quality checks

The lamp ships as a complete bulb-and-housing assembly so no separate alignment or handling of a bare bulb is required. Each unit is tested for beam performance ignition voltage appearance connections and run-time under ISO 9001 processes. The supplier offers an 180-day warranty and a 30-day return window. Buyers who need a bare bulb only or a different wattage will not be served by this module.

Highlights

  • Ready to install with pre-assembled housing
  • Philips UHP 220W bulb delivers bright projection
  • 2,000 normal hours extends replacement interval
  • 3,000 economy hours lowers running cost
  • Manufactured to ISO9001 quality standards

Specifications

BrandSanyo
TypeUHP
Wattage220W
Lamp Life2,000 (Normal) - 3,000 (Economy) Hrs.

Questions about this item

How do I install the ET-SLMP132 lamp module in my Sanyo projector and what step do people miss?

The module arrives fully assembled with the Philips 220W UHP bulb inside its housing; insert it into the projector's lamp bay and secure the retaining screws, then reset the lamp-hour counter in the on-screen menu — skipping that reset is the step most users forget.

What maintenance or replacement will the ET-SLMP132 need after extended use?

The 220W UHP bulb is rated for 2000 hours in normal mode or 3000 hours in economy mode; when brightness drops or the projector signals end of life, replace the entire lamp module — no separate filter or bulb-only change is required.

What limit appears first during long sessions with the ET-SLMP132?

Thermal protection will trigger before the 2000-to-3000-hour rated life is reached if ventilation is restricted; keep intake and exhaust vents clear so the 220W UHP lamp stays within its operating temperature range.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.