We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black steel outdoor tilt TV mount, slim 2.18-inch profile, lockable quick-release straps

SANUS SYSTEMS

SANUS SYSTEMS VODLT1-B2 outdoor tilt tv mount 37-95" 180 lbs 2.18

SKU CH-G6Q0-8BKGB MPN VODLT1-B2

Weatherproof outdoor tilt mount holds 37-95" TVs up to 180 lbs with 7/-10° fingertip tilt, 2.18" slim profile and padlock security

  • NameTilting Outdoor
  • Install LocationWall
  • Mount StyleTilt
  • MaterialSteel
  • ColorBlack
  • MovableYes
  • Weatherproof steel with anti-corrosion coating and stainless hardware for all-weather durability
  • Virtual Axis fingertip tilt gives smooth 7° up / 10° down angle changes
  • ProSet post-install leveling and height adjustment keeps the TV perfectly straight
  • Slim 2.18-inch wall distance creates a clean, low-profile look
  • Padlock holes and quick-release straps add security and easy removal

Outdoor tilt mount for 37‑95 inch TVs

The Sanus VODLT1‑B2 is a weatherproof steel bracket designed for exterior walls. It supports screens from 37 to 95 inches weighing up to 180 lbs and fits VESA patterns from 200x200 to 690x425. UL certification confirms the structural rating.

Steel construction with anti‑corrosion coating

Stainless‑steel hardware resists rain and humidity while the black finish stays discreet. The Virtual Axis Fingertip tilt lets you adjust the screen 7 degrees up or 10 degrees down without tools. Quick‑release straps allow the TV to be lifted off the wall plate for servicing.

Verify your wall and screen before ordering

Confirm the mounting surface can carry 180 lbs and accepts the supplied lag bolts or anchors. Measure the TV’s VESA holes to ensure they fall within the 200x200 to 690x425 range. Allow 2.18 inches of clearance from the wall for the slim profile and check that a padlock shackle fits the security holes if theft deterrence is required.

Highlights

  • Weatherproof steel with anti-corrosion coating and stainless hardware for all-weather durability
  • Virtual Axis fingertip tilt gives smooth 7° up / 10° down angle changes
  • ProSet post-install leveling and height adjustment keeps the TV perfectly straight
  • Slim 2.18-inch wall distance creates a clean, low-profile look
  • Padlock holes and quick-release straps add security and easy removal

Specifications

BrandSANUS SYSTEMS
ModelVODLT1-B2
NameTilting Outdoor
Install LocationWall
Mount StyleTilt
MaterialSteel
ColorBlack
MovableYes
TV Size Capacity< 90"
TV Weight CapacityMax. load 180 lbs.
VESA CompatibleYes
Distance from Wall2.18
Tilt Range7/-10
UL CertifiedYes
Level IncludedYes
Cable ManagementYes
FeatureLockable
Height22.93
Width30
Depth2.18
Weight9
Shipping weight4.08 kg
Package size762 × 582 × 55 mm

Questions about this item

Does the VESA pattern on this SANUS VODLT1-B2 cover the 200x200 to 690x425 range used by most 37-95 inch displays?

Yes, the mount supports universal VESA sizes from 200x200 up to 690x425, matching the hole patterns found on TVs between 37 and 95 inches.

What wall structure and hardware are required to hold the 180 lb rated load?

The steel bracket must be anchored into wood studs or concrete using the supplied stainless-steel lag bolts or concrete anchors; drywall alone cannot support the 180 lb capacity.

How do you engage the Virtual Axis Fingertip Tilt and ProSet leveling after the TV is hung?

Loosen the tilt tension knob, adjust the screen to the desired angle between 7 degrees up and 10 degrees down, then use the ProSet height screws to level the display before re-tightening.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.