We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
A thin black metal wall bracket with two horizontal arms and quick-release tabs, shown flat against a wall

SANUS SYSTEMS

SANUS SYSTEMS ML11-B2 tv mount 32-50" 100.20 lb 100x100-200x300

SKU CH-A8H1-WMNEG MPN ML11-B2

A fixed wall mount holds 32 to 50 inch flat-panel TVs up to 100.20 lb just 1.52 cm from the wall and includes ClickStand cable access, quick-release tabs.

  • Sits just 1.52 cm from the wall for a super-slim profile
  • ClickStand holds the TV away for easy cable access without removing it
  • Quick-release tabs unlock the display from the wall plate in seconds
  • ProSet enables post-install height and level micro-adjustments
  • Lateral shift centres the screen even when studs are off-centre

Fixed low-profile wall mount

The Sanus ML11-B2 is a fixed-position wall mount designed for flat-panel TVs measuring 32 to 50 inches. It supports a single display weighing up to 100.20 lb or 45.45 kg. The mount holds the screen just 55 mm or 1.52 cm from the wall for a sleek, ultra-low profile appearance.

VESA pattern and stud alignment

Verify that your TV uses a VESA mounting pattern of 100x100, 100x200, 200x100, 200x200 or 200x300 mm before ordering. Ensure the wall structure provides suitable anchoring points such as wood studs for the included hardware. The mount accommodates one display only, so buyers needing multi-screen setups should look elsewhere.

ClickStand access and micro-adjustments

ClickStand technology holds the bottom of the TV away from the wall plate, allowing cable connections without removing the display. Quick-release tabs on both brackets unlock the TV for deeper service access while staying hidden during normal use. ProSet enables post-installation height and level micro-adjustments, while lateral shift lets the screen slide left or right to centre over off-centre studs.

Highlights

  • Sits just 1.52 cm from the wall for a super-slim profile
  • ClickStand holds the TV away for easy cable access without removing it
  • Quick-release tabs unlock the display from the wall plate in seconds
  • ProSet enables post-install height and level micro-adjustments
  • Lateral shift centres the screen even when studs are off-centre

Specifications

No published specifications for this item yet.

Questions about this item

Does the ML11-B2 include mounting hardware or must I buy screws separately?

The mount ships with the hardware needed to secure it to the wall and to attach the TV brackets, so no separate screw kit is required.

My TV uses a 200 x 300 mm VESA pattern — will the ML11-B2 fit?

Yes, the ML11-B2 supports 100 x 100, 100 x 200, 200 x 100, 200 x 200, 200 x 300 and 200 x 200 mm patterns, covering your TV.

The spec says 55 mm from the wall — what does that mean once the TV is hung?

The screen sits 55 mm (1.52 cm) off the wall, and ClickStand holds the bottom slightly farther out so you can reach cables without removing the TV.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.