Sangoma Technologies Corporation
Sangoma Technologies Corporation VEGA-200-060KIT voip gateway 60 calls
A VoIP gateway connecting digital telephony equipment to IP networks with capacity for 60 simultaneous calls and dual Gigabit Ethernet connections
- Handles 60 simultaneous calls out of the box
- Dual Gigabit Ethernet ports for redundant network links
- Branch-office survivability keeps local calls up during WAN loss
- Flexible routing enables fallback and least-cost call paths
- Emergency PSTN backup maintains service when IP fails
Sangoma Vega 200G Dual E1/T1 Gateway
The Sangoma Vega 200G is a VoIP gateway that connects digital telephony equipment to IP networks. Each unit is factory configured for 60 simultaneous calls and cannot be expanded beyond that capacity. It provides dual Gigabit Ethernet connections for network redundancy. This hardware suits organisations migrating legacy TDM infrastructure to SIP-based systems.
Branch offices needing WAN-failure survivability
The gateway targets sites that must keep internal calls working and reach the PSTN when the wide-area link goes down. The Sangoma Resiliency Enablement Suite enables local call routing, backup-switch failover and direct PSTN fallback during outages. Buyers who require more than 60 concurrent sessions or need a platform that can scale beyond the fixed limit should evaluate higher-capacity appliances.
SRES and SNAP software bundles
The Sangoma Resiliency Enablement Suite adds branch-office survivability features such as local extension-to-extension calling, backup-switch routing and emergency PSTN backup when the WAN fails. The Sangoma Network Appliance Provisioning tool simplifies initial configuration and ongoing management across multiple sites. No additional hardware accessories are included with the base unit.
Highlights
- Handles 60 simultaneous calls out of the box
- Dual Gigabit Ethernet ports for redundant network links
- Branch-office survivability keeps local calls up during WAN loss
- Flexible routing enables fallback and least-cost call paths
- Emergency PSTN backup maintains service when IP fails
Specifications
No published specifications for this item yet.
Questions about this item
What E1/T1 interfaces must my PBX provide for the Vega 200G to connect?
The gateway has dual E1/T1 ports; each can be set independently as network side or terminal side to match your PBX configuration.
Will my existing ETSI or NI2 ISDN lines work with this gateway?
Yes, the Vega 200G supports ETSI, VN4, NI1, NI2, AT&T 5ESS, DMS100, QSIG, CAS and R2 MFC signalling.
How do I verify the gateway is handling the full 60 simultaneous calls after setup?
Monitor the call-status page in the web interface; it shows active sessions up to the licensed 60-call capacity.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



