SAMXI jijia Dual-Band WiFi 6e Antenna 2.4/5 GHz RP SMA 1 m Magnetic Base
A dual-band antenna with 8 dBi gain, 1 Gbps wireless rate and magnetic base for motherboards using RP SMA connectors
- TypeDual-band Wi-Fi antenna for specific GIGABYTE and other moth
- ColorBlack
- SpecificationsDual-band Wi-Fi antenna for specific GIGABYTE and other moth
- FeaturesDual-band Wi-Fi antenna for specific GIGABYTE and other moth
- Wi-Fi 6e tri-band coverage on 2.4, 5 and 6 GHz bands
- 8 dBi gain extends wireless reach for stable desktop connections
- 1 Gbps wireless data rate with 4 Gbps maximum LAN throughput
- 1 metre cable and magnetic base allow flexible antenna positioning
- RP SMA male connector fits motherboards with dual inner-pin ports
Compatible Motherboard Antenna
This dual-band WiFi 6e antenna connects to RP SMA ports on listed GIGABYTE and ASUS motherboards. It supports 2.4 GHz and 5 GHz frequencies with 8 dBi gain. The 1 metre cable allows flexible placement for desktop PCs. Builders using supported Intel AX200, AX210 or 9260AC cards can attach it directly.
Magnetic Base Signal Placement
The magnetic base secures to steel chassis panels without tools. Users can fold the antenna and adjust its angle to optimise reception. No active cooling or power draw is involved, so the accessory adds no noise or thermal load to the system. The passive design keeps operation completely silent.
Tri-Band Extension With Broad Card Support
The 1 metre RP SMA cable functions as a tri-band extension for 2.4 GHz, 5 GHz and 6 GHz signals. Compatibility extends to Intel 3165, 7265, 8260, 8265, 9260 and 9560 wireless cards. Bluetooth functionality is maintained through the same connection. No additional software or drivers are required beyond the wireless card itself.
Highlights
- Wi-Fi 6e tri-band coverage on 2.4, 5 and 6 GHz bands
- 8 dBi gain extends wireless reach for stable desktop connections
- 1 Gbps wireless data rate with 4 Gbps maximum LAN throughput
- 1 metre cable and magnetic base allow flexible antenna positioning
- RP SMA male connector fits motherboards with dual inner-pin ports
Specifications
| Brand | SAMXI |
|---|---|
| Model | jijia |
| Part Number | jijia |
| Type | Dual-band Wi-Fi antenna for specific GIGABYTE and other motherboards with 8dbi gain, 1Gbps wireless data rate, 4Gbps maximum LAN supporting 2.4GHz 5GHz frequencies, RP SMA Male connector, 1-meter cable length |
| Color | Black |
| Specifications | Dual-band Wi-Fi antenna for specific GIGABYTE and other motherboards with 8dbi gain, 1Gbps wireless data rate, 4Gbps maximum LAN supporting 2.4GHz 5GHz frequencies, RP SMA Male connector, 1-meter cable length |
| Features | Dual-band Wi-Fi antenna for specific GIGABYTE and other motherboards with 8dbi gain, 1Gbps wireless data rate, 4Gbps maximum LAN supporting 2.4GHz 5GHz frequencies, RP SMA Male connector, 1-meter cable length |
Questions about this item
How do I attach the antenna to my case and orient it for best signal?
The magnetic base clamps to any steel panel on the chassis. Screw the RP-SMA male connector onto the motherboard or card until finger-tight, then fold or swivel the whip until the signal meter peaks; over-tightening with tools can strip the centre pin.
Will the magnetic base or cable degrade over time and need replacement?
The magnet is permanent and the 1 m cable is fixed; only the RP-SMA threads wear if repeatedly unscrewed. Inspect the centre pin for bending after each removal and replace the whole antenna if the cable sheath cracks or the gain drops noticeably.
What throughput ceiling will I hit first during long transfers?
The antenna supports a 1 Gbps maximum wireless data rate and a 4 Gbps LAN ceiling; sustained heavy traffic will saturate the 1 Gbps Wi-Fi link before the 4 Gbps wired backplane becomes a factor.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
