SAMSUNG
SAMSUNG M471B5273DH0-YK0 4GB DDR3L 1600 CL11 laptop RAM
4GB DDR3L 1600 CL11 SO-DIMM laptop memory module with 1.35V operation and 204-pin interface
- Capacity4GB
- Type204-Pin DDR3 SO-DIMM
- SpeedDDR3L 1600 (PC3L 12800)
- CAS LatencyCL11
- Timing11-11-F3
- Voltage1.50V
- 4GB capacity upgrades laptop memory
- DDR3L 1600 speed handles multitasking smoothly
- CL11 timing delivers responsive data access
- 35 V operation reduces power draw
- 204-pin SO-DIMM fits standard notebook slots
4 GB DDR3L SO-DIMM for notebooks
This Samsung module delivers 4 GB of DDR3L memory at 1600 MHz with CL11 timing. It uses the 204-pin SO-DIMM form factor required by many laptops and small-form-factor systems. The stick is unbuffered and non-ECC, matching the standard layout for consumer notebook upgrades. Buyers who need more capacity per slot or a newer DDR generation will not be served by this part.
Straightforward slot installation
Align the notch on the 204-pin edge connector with the key in the SO-DIMM socket, press down until the side clips click, and the module is seated. The low-profile height fits most laptop bays without fouling the chassis lid. A common issue is inserting the stick at the wrong angle or not pressing firmly enough, which leaves the contacts partially engaged and causes boot failures. No software configuration is required beyond a normal restart.
Verify DDR3L support and voltage before ordering
Check that your notebook or motherboard lists DDR3L or PC3L-12800 compatibility and accepts 1.35 V or 1.50 V operation. Confirm the system uses 204-pin SO-DIMM slots and does not require registered or ECC memory. Ensure a free slot is available or that you are replacing an existing module. Consult the device manual or vendor specification sheet for the exact memory configuration rules.
Highlights
- 4GB capacity upgrades laptop memory
- DDR3L 1600 speed handles multitasking smoothly
- CL11 timing delivers responsive data access
- 35 V operation reduces power draw
- 204-pin SO-DIMM fits standard notebook slots
Specifications
| Brand | SAMSUNG |
|---|---|
| Model | M471B5273DH0-YK0 |
| Capacity | 4GB |
| Type | 204-Pin DDR3 SO-DIMM |
| Speed | DDR3L 1600 (PC3L 12800) |
| CAS Latency | CL11 |
| Timing | 11-11-F3 |
| Voltage | 1.50V |
| ECC | No |
| Buffered/Registered | Unbuffered |
Questions about this item
How can I verify the module runs at 1600 MHz with CL11 timing after installation?
Open Task Manager or CPU-Z and confirm the speed reads 1600 MHz and the CAS latency shows 11-11-F3 at 1.35 V.
What is included with the M471B5273DH0-YK0 stick and do I need extra parts?
The box contains one 4 GB 204-pin SO-DIMM; no brackets, screws or additional cables are required for a standard laptop slot.
Should I choose the 1.35 V DDR3L version or a 1.50 V DDR3 module for my notebook?
Select this 1.35 V DDR3L stick if your laptop specifies PC3L-12800S; use a 1.50 V DDR3 module only when the manual calls for standard voltage.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Sunfounder Raspberry Pi Ultimate Kit with PiCrawler AI Robot 337 components 131 projects
minisforum MF-SRP01 SSD Heatsink accessories barebone
- SSD Heatsink



