SAMSUNG
SAMSUNG 4GB Kit 2×2GB DDR3 1333MHz SODIMM laptop RAM M471B5673FH0-CH9
A 4 GB dual-channel kit of two 2 GB DDR3 SODIMM modules running at 1333 MHz with 1.50 V unbuffered operation
- Capacity4GB (2 x 2GB)
- SpeedDDR3 1333 (PC3 10600)
- Voltage1.50V
- ECCNo
- Buffered/RegisteredUnbuffered
- 4 GB total capacity from two matched 2 GB modules
- 1333 MHz DDR3 speed rated at PC3-10600
- Low 1.50 V operation reduces power draw
- Non-ECC unbuffered design for standard laptop slots
- 204-pin SODIMM form factor fits compatible notebooks
Samsung DDR3-1333 SODIMM kit
This Samsung kit supplies 4 GB of DDR3 memory in two 2 GB modules rated at 1333 MHz and PC3-10600. It targets owners of older laptops that use 204-pin unbuffered non-ECC SO-DIMM slots and need a straightforward capacity increase.
Thermals and power
Each module runs at the standard 1.50 V DDR3 voltage, so power draw stays within the limits defined by the JEDEC specification for this speed grade. The low-profile design produces minimal heat under typical office workloads, allowing the laptop's existing cooling to manage temperatures without extra fan noise.
What the kit changes
Installing both modules activates dual-channel operation on supported platforms, which can improve memory bandwidth for everyday tasks such as web browsing and document editing. No software, drivers or firmware are included; the upgrade is purely a hardware capacity and bandwidth change.
Highlights
- 4 GB total capacity from two matched 2 GB modules
- 1333 MHz DDR3 speed rated at PC3-10600
- Low 1.50 V operation reduces power draw
- Non-ECC unbuffered design for standard laptop slots
- 204-pin SODIMM form factor fits compatible notebooks
Specifications
| Capacity | 4GB (2 x 2GB) |
|---|---|
| Speed | DDR3 1333 (PC3 10600) |
| Voltage | 1.50V |
| ECC | No |
| Buffered/Registered | Unbuffered |
Questions about this item
How do I install the 204-pin SODIMM modules and which step is often missed?
Align the notch on each module with the slot key, insert at an angle until the gold contacts disappear, then press down firmly until both side clips click into place — the click is the step many skip.
What maintenance or replacement will this DDR3 kit need over time?
No scheduled maintenance is required; if a module fails or capacity becomes insufficient, replace the pair with another DDR3 1333 MHz 1.50 V SODIMM kit.
What limit appears first during sustained heavy workloads?
The 4 GB total capacity and 1333 MHz bandwidth become the bottleneck before thermal or voltage limits are reached.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Sunfounder Raspberry Pi Ultimate Kit with PiCrawler AI Robot 337 components 131 projects
minisforum MF-SRP01 SSD Heatsink accessories barebone
- SSD Heatsink



