SAMSUNG
SAMSUNG 4GB DDR4 2400 260-Pin SO-DIMM M471A5244BB0 CRC
4GB DDR4 2400 SO-DIMM laptop memory module with 260-pin unbuffered design
- Capacity4GB
- Type260-Pin DDR4 SO-DIMM
- SpeedDDR4 2400 (PC4 19200)
- ECCNo
- Buffered/RegisteredUnbuffered
- Heat SpreaderNo
- 4GB capacity expands laptop multitasking headroom
- DDR4 2400 speed delivers PC4 19200 bandwidth
- 260-pin SO-DIMM form factor fits standard laptop slots
- Unbuffered non-ECC design suits consumer notebooks
- Samsung M471A5244BB0 CRC module ensures OEM-grade reliability
4 GB DDR4 2400 SO-DIMM
This 4 GB laptop memory module uses 260-pin DDR4 technology and runs at 2400 MT/s. It is an unbuffered, non-ECC stick without a heat spreader. The part number M471A5244BB0 identifies the Samsung component for service or upgrade planning.
Fits DDR4 2400 SO-DIMM slots
It suits notebooks and small-form-factor boards that accept 260-pin DDR4 SO-DIMMs at PC4-19200 speed. Builders needing ECC, registered modules, higher capacities per slot, or a different pin count should look at other parts.
260-pin DDR4 SO-DIMM interface
The 260-pin SO-DIMM edge connector is the single specification that decides whether this module fits the target system. Only platforms with matching DDR4 SO-DIMM sockets can use it.
Highlights
- 4GB capacity expands laptop multitasking headroom
- DDR4 2400 speed delivers PC4 19200 bandwidth
- 260-pin SO-DIMM form factor fits standard laptop slots
- Unbuffered non-ECC design suits consumer notebooks
- Samsung M471A5244BB0 CRC module ensures OEM-grade reliability
Specifications
| Brand | SAMSUNG |
|---|---|
| Capacity | 4GB |
| Type | 260-Pin DDR4 SO-DIMM |
| Speed | DDR4 2400 (PC4 19200) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Heat Spreader | No |
Questions about this item
Will the 260-pin SO-DIMM fit my laptop's DDR4 memory slot?
The module uses the standard 260-pin SO-DIMM form factor for DDR4 laptop memory. Align the notch with the slot key and press down until the side clips click.
What is the correct orientation when inserting the M471A5244BB0 module?
Match the notch on the gold edge connector to the key in the slot; it only fits one way. Press firmly at both ends until the retaining clips snap shut.
Does the 4GB DDR4 2400 module require any firmware updates or driver installation?
No software installation is needed. The system BIOS detects the PC4-19200 speed automatically at boot.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Sunfounder Raspberry Pi Ultimate Kit with PiCrawler AI Robot 337 components 131 projects
minisforum MF-SRP01 SSD Heatsink accessories barebone
- SSD Heatsink



