We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black handheld dynamic microphone with XLR connector and clip

Samson Q4 Dynamic Microphone XLR -50dB 76dB SNR 80Hz-12kHz

SKU CH-BKF8-2H73N

A supercardioid dynamic microphone with 76 dB SNR and -50 dB sensitivity for clear live vocals and instruments

  • Colorblack / black
  • ConnectorXLR
  • Microphone Sensitivity-50 decibels
  • Microphone Signal to Noise Ratio(SNR)76 decibels
  • FeaturesClip
  • Neodymium element delivers wide dynamic range for vocals and instruments
  • Supercardioid pattern rejects off-axis sound to reduce feedback
  • 80 Hz to 12 kHz response captures balanced audio detail
  • 76 dB signal-to-noise ratio keeps recordings clean
  • 50 dB sensitivity provides strong output with low impedance

Dynamic XLR Microphone for Live and Studio Use

The Samson Q4 is a dynamic microphone with a neodymium element and a supercardioid pickup pattern. It delivers a sensitivity of -50 decibels and a signal-to-noise ratio of 76 decibels. The frequency response spans 80Hz to 12kHz. It is built for live vocals, presentations and instrument miking.

Included XLR Cable Clip and Carry Case

The bundle supplies an XLR cable so you can connect directly to a mixer or interface without buying a separate lead. A microphone clip mounts the capsule to a stand and the carry case protects the unit during transport. These accessories let you start recording or performing immediately.

Check Your Interface Phantom Power and Stand Thread

This microphone uses an XLR connector and requires an audio interface or mixer with a compatible preamp. It does not need phantom power because it is a dynamic design. Verify that your mic stand uses a standard thread size to accept the supplied clip before ordering.

Highlights

  • Neodymium element delivers wide dynamic range for vocals and instruments
  • Supercardioid pattern rejects off-axis sound to reduce feedback
  • 80 Hz to 12 kHz response captures balanced audio detail
  • 76 dB signal-to-noise ratio keeps recordings clean
  • 50 dB sensitivity provides strong output with low impedance

Specifications

BrandSAMSON
ModelQ4
Part NumberSAQ4CL
Colorblack / black
ConnectorXLR
Microphone Sensitivity-50 decibels
Microphone Signal to Noise Ratio(SNR)76 decibels
FeaturesClip

Questions about this item

Will the XLR connector or the supplied clip need replacement after regular stage use?

The Q4 uses a standard XLR connector and includes a microphone clip; both are built for repeated connection and removal in live settings.

What limits the microphone when capturing loud sources such as drums or guitar amps all night?

The dynamic neodymium element handles high sound pressure levels, so the practical limit is the 12 kHz upper frequency response rather than overload.

Does the Q4 generate self-noise or heat during a full-day recording session?

With a 76 dB signal-to-noise ratio and -50 dB sensitivity, the microphone adds minimal self-noise and produces no measurable heat during continuous operation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.